CDCE62002 datasheet(8/49 Pages) TI

8 / 49 page

ABSOLUTE MAXIMUM RATINGS

THERMAL CHARACTERISTICS

PACKAGE

ELECTRICAL CHARACTERISTICS

CDCE62002

SCAS882A – JUNE 2009 – REVISED JULY 2009.............................................................................................................................................................. www.ti.com

over operating free-air temperature range (unless otherwise noted)

(1)

VALUE / UNIT

Supply voltage range VCC(2)

–0.5 V to 4.6 V

Input voltage range, VI

(3)

–0.5 V to VCC + 0.5 V

Output voltage range, VO

(3)

–0.5 V to VCC + 0.5 V

Input Current (VI < 0, VI > VCC)

±20 mA

Output current for LVPECL/LVCMOS Outputs (0 < VO < VCC)

±50 mA

Maximum junction temperature, TJ

125°C

Storage temperature range, Tstg

–65°C to 150°C

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.

(2)

All supply voltages have to be supplied simultaneously.

(3)

The input and output negative voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

Package Thermal Resistance for QFN (RGZ) Package

Airflow (lfm)

JP (°C/W)

θJA (°C/W)

JEDEC Compliant Board (3X3 VIAs on PAD)

1.13

200

JEDEC Compliant Board (3X3 VIAs on PAD)

1.13

28.3

400

JEDEC Compliant Board (3X3 VIAs on PAD)

1.13

27.2

The CDCE62002 is packaged in a 32-Pin Lead Free “Green” Plastic Quad Flatpack Package with enhanced

bottom thermal pad for heat dissipation. The Texas Instruments Package Designator is; RHB (S-PQFP-N32).

Please refer to the Mechanical Data appendix at the end of this document for more information.

recommended operating conditions for the CDCE62002 Device for under the specified Industrial temperature range of –40°C

to 85°C

PARAMETER

TEST CONDITIONS

MIN

TYP(1)

MAX

UNIT

POWER SUPPLY

Supply voltage, VCC_OUT, VCC_PLLDIV, VCC_PLLD, VCC_IN, and VCC_AUX

3.3

3.6

Analog Supply Voltage, VCC_PLLA, & VCC_VCO

3.3

3.6

REF at 30.72MHz

PLVPECL

850

Outputs are LVPECL

Output 1 = 491.52 MHz

REF at 30.72MHz

Output 2 = 245.76 MHz

PLVDS

750

Outputs are LVDS

In case of LVCMOS Outputs (1) =

245.76MHz

REF at 30.72MHz

PLVCMOS

800

Outputs are LVCMOS

POFF

REF at 30.72MHz

Dividers and Outputs are disabled

450

PPD

Device is Powered Down

DIFFERENTIAL INPUT MODE (REF_IN)

Input amplitude, VINPP (VIN+ – VIN–)

0.1

1.3

Common-mode input voltage, VIC

1.0

VCC–03

VI = VCC,

IIH

Differential input current High (No internal Termination)

µA

VCC = 3.6 V

VI = 0 V,

IIL

Differential input current Low (No internal Termination)

–20

µA

VCC = 3.6 V

Input Capacitance on REF_IN

LVCMOS INPUT MODE (AUX_IN)

VIL

Low-level input voltage LVCMOS

0.3 VCC

(1)

All typical values are at VCC = 3.3 V, temperature = 25°C.

Submit Documentation Feedback

Product Folder Link(s): CDCE62002

CDCE62002 bảng dữ liệu(PDF) 8 Page - Texas Instruments

CDCE62002 bảng dữ liệu(HTML) 8 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

bảng dữ liệu tải về

Link URL