D2T

D2T

2

Characteristics

Electrical ratings

5 A at 125/250 VAC between terminals 1 and 2

0.1 A at 125 VAC between terminals 3 and 4

Operating speed

10 to 500 mm/second (0.39 to 19.7 in/second)

Operating frequency

Mechanical

120 operations per min.

Electrical

60 operations per min.

Contact resistance

50 m

Ω max. between terminals 1 and 2

100 m

Ω max. between terminals 3 and 4

Insulation resistance

100 M

Ω min. (at 500 VDC)

Dielectric strength (VAC)

1,000 VAC, for 1 minute between contacts of same polarity

1,500 VAC for 1 minute between current-carrying metal parts and ground,

and between contacts of different polarity

Vibration resistance

Malfunction

10 to 55 Hz, 1.5 mm double amplitude

Shock resistance

Malfunction

Life expectancy

Mechanical

100,000 operations min. (at full OT value, operating frequency of 120

operations/min.)

Electrical

100,000 operations min. (at rated OT value, operating frequency of 60

operations/min.)

Ambient temperature

Operating

-25

° to 85°C (with no icing)

Ambient humidity

Operating

85% RH max.

Weight

Approx. 10 g

Operating characteristics

D2T-T1, D2T-T1S

D2T-LT1, D2T-LT1S

OF max.

330 g

150 g

RF min.

50 g

20 g

TTF max.

650 g

250 g

OT min.

0.8 mm

1.6 mm

OP

4.4

±0.6 mm (see note)

6.9

±1.3 mm (see note)

Note: There is no actuation order between terminals 1 and 2 and terminals 3 and 4.

Dimensions

Pin plunger

D2T-T1, D2T-T1S

Unit: mm (inch)

Note: 1. Unless otherwise specified, a tolerance of

± 0.4 mm applies to all dimensions.

2. The above illustrations and dimensions of the pin plunger and hinge lever are for D2T models with angled terminals. Refer to

the dimensions in “Terminals” for the straight terminals of D2T.