| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
UM0470 bảng dữ liệu(PDF) 13 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM0470 bảng dữ liệu(HTML) 13 Page - STMicroelectronics |
|
13 / 37 page ![]() UM0470 Single wire interface module (SWIM) 13/37 3.8 SWIM communication in Halt mode To maintain the communication link with the debug host, the HSI oscillator remains on when the MCU enters Halt mode. This means that halt mode power consumption measurements have no meaning when the SWIM module is active. The NO_ACCESS bit in the SWIM_CSR register is set when the system is in HALT, WFI or readout protection mode. This means the bus is not accessible in this case. The OSCOFF bit in the SWIM_CSR register is used to switch off the oscillator. In this case, debug control is lost as long as the device is in Halt mode and the SWIM pin is high. The only way to recover the debug control is to induce a falling edge on SWIM pin: this will re- enable the HSI oscillator. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |