V23836-C18-R363 Product Specification – October 2006

© Finisar Corporation October 2006 Rev. A Preliminary Data

9

Eye Safety

This laser based single mode transceiver is a Class 1 product. It complies with IEC

60825-1/A2: 2001 and FDA performance standards for laser products (21 CFR 1040.10

and 1040.11) except for deviations pursuant to Laser Notice 50, dated July 26, 2001.

CLASS 1 LASER PRODUCT

To meet laser safety requirements the transceiver shall be operated within the

AbsoluteMaximum Ratings.

Note: All adjustments have been made at the factory prior to shipment of the devices.

No maintenance or alteration to the device is required.

Tampering with or modifying the performance of the device will result in voided

product warranty.

Failure to adhere to the above restrictions could result in a modification that is

considered an act of “manufacturing”, and will require, under law, recertification

of the modified product with the U.S. Food and Drug Administration (ref. 21 CFR

1040.10 (i)).

Laser Emission Data

Wavelength

1310 nm

Maximum total output power

(as defined by IEC: 7mm aperture at 14mm distance)

15.6 mW / 11.9 dBm

Beam divergence (full angle) / NA (half angle)

11° / 0.1 rad

Figure 3

Required Labels

Figure 4

Laser Emmission