TLV1544CD datasheet(31/41 Pages) TI

31 / 41 page

TLV1544C, TLV1544I, TLV1548C, TLV1548I, TLV1548M

LOW-VOLTAGE 10-BIT ANALOG-TO-DIGITAL CONVERTERS

WITH SERIAL CONTROL AND 4/8 ANALOG INPUTS

SLAS139C – DECEMBER 1996 – REVISED JANUARY 1999

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

APPLICATIONS INFORMATION

55 pF MAX

1 k

Ω

Driving Source†

TLV1544/48

VI = Input Voltage at AIN

VS = External Driving Source Voltage

Rs = Source Resistance

ri = Input Resistance (MUX on Resistance)

Ci = Input Capacitance

VC= Capacitance Charging Voltage

† Driving source requirements:

• Noise and distortion for the source must be equivalent to the resolution of the converter.

• Rs must be real at the input frequency.

Figure 40. Equivalent Input Circuit Including the Driving Source

maximum conversion throughput

For a supply voltage at 5 V, if the source impedance is less than 1 k

Ω, this equates to a minimum sampling

time tch(0.5 LSB) of 0.84 µs. Since the sampling time requires six I/O clocks, the fastest I/O clockfrequency is

6/tch = 7.18 MHz. The minimal total cycle time is given as:

tc = taddress + tsample + tconv + td(EOC↑ – CS↓)

= 0.56

µs + 0.84 µs + 10 µs + 0.1 µs

= 11.5

µs

A maximum throughput of 87 KSPS. The throughput can be even higher with a smaller source impedance.

When source impedance is 100

Ω, the minimum sampling time is 0.46 µs. The maximum I/O clock frequency

possible is almost 13 MHz. Then 10 MHz clock (maximum I/O CLK for TLV1544/1548) can be used. The minimal

total cycle time is:

tc = taddress + tsample + tconv + td(EOC↑ – CS↓)

= 4

× 1/f + 0.46 µs + 10 µs + 0.1 µs

= 0.4

µs + 0.46 µs + 10 µs + 0.1 µs

= 10.96

µs

The maximum throughput is 1/10.96

µs = 91 KSPS for this case.

TLV1544CD bảng dữ liệu(PDF) 31 Page - Texas Instruments

TLV1544CD bảng dữ liệu(HTML) 31 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

bảng dữ liệu tải về

Link URL