SH7713 datasheet(441/904 Pages) RENESAS

tên linh kiện	SH7713

Giải thích chi tiết về linh kiện	Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

PDF	904 Pages

Scroll/Zoom	100%

nhà sản xuất	RENESAS [Renesas Technology Corp]

Trang chủ	http://www.renesas.com

Logo

441 / 904 page

Section 12 Bus State Controller (BSC)

Rev.1.50 Aug. 30, 2006 Page 401 of 860

REJ09B0288-0150

A14

CKE

CKIO

CSn

RAS

CAS

RD/

D15

DQMLU

DQMLL

64-Mbit synchronous SDRAM

(1M x 16 bits x 4 banks)

A13

CKE

CLK

RAS

CAS

I/O15

I/O0

DQMU

DQML

This LSI

Figure 12.13 Example of 16-Bit Data-Width SDRAM Connection

Address Multiplexing: An address multiplexing is specified so that SDRAM can be connected

without external multiplexing circuitry according to the setting of bits BSZ[1:0]in CSnBCR,

AxROW[1:0] and AxCOL[1:0] in SDCR. Tables 12.12 to 12.17 show the relationship between the

settings of bits BSZ[1:0], AxROW[1:0], and AxCOL[1:0] and the bits output at the address pins.

Do not specify those bits in the manner other than this table, otherwise the operation of this LSI is

not guaranteed. A25 to A18 are not multiplexed and the original values of address are always

output at these pins.

When the data bus width is 16 bits (BSZ[1:0] =B’10), A0 of SDRAM specifies a word address.

Therefore, connect this A0 pin of SDRAM to the A1 pin of the LSI; the A1 pin of SDRAM to the

A2 pin of the LSI, and so on. When the data bus width is 32 bits (BSZ[1:0] =B’11), the A0 pin of

SDRAM specifies a longword address. Therefore, connect this A0 pin of SDRAM to the A2 pin of

the LSI; the A1 pin of SDRAM to the A3 pin of the LSI, and so on.

SH7713 bảng dữ liệu(PDF) 441 Page - Renesas Technology Corp