| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
M16C/62M bảng dữ liệu(PDF) 571 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M16C/62M bảng dữ liệu(HTML) 571 Page - Renesas Technology Corp |
|
571 / 615 page ![]() Appendix 1 Mitsubishi microcomputers M16C / 62A Group SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER 2-254 Appendix 1 Check Sheet The following check sheet was created based on items which had been the source of problems in the past. We recommend you refer to the check sheet when troubleshooting. Are you making use of Technical News? For the latest copy of Technical News, contact an authorized dealer. Checks regarding register initial settings Has the initial setting been made in the interrupt stack pointer (ISP) at the top of the program? Has the initial setting been made in the user stack pointer (USP)? (Only if using the USP) Does the USP overlap the ISP area? (Only if using the USP) Is interrupt enabled after setting the ISP and USP? Is the top address of the variable interrupt vector table set in the interrupt table register (INTB)? Is interrupt enabled after setting the INTB? Has the initial setting been made in the frame base register (FB)? (Only if using the FB) Has the initial setting been made in the stack base register (SB)? (Only if using the SB) Checks regarding the internal memory Does the RAM capacity used in the program exceed the RAM capacity of the microcomputer? Does the ROM capacity used in the program exceed the ROM capacity of the microcomputer? Checks regarding the protect register Is writing enabled in the protect register (address 000A16) before writing in the system clock control register (addresses 000616 and 000716)? Is writing enabled in the protect register before writing in the processor mode register (addresses 000416 and 000516)? Is writing enabled in the protect register before writing in the port P9 direction register (address 03F316)? Is writing effectuated in the port P9 direction register by the next instruction after writing is enabled in the protect register? Does not an interrupt generate between the instruction writing is enabled in the protect register and the instruction writing in the port P9 direction register? |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |