công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

H8S/2463 bảng dữ liệu(PDF) 1010 Page - Renesas Technology Corp

tên linh kiện H8S/2463
Giải thích chi tiết về linh kiện  16-Bit Single-Chip Microcomputer H8S Family / H8S/2400 Series
PDF  1250 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  RENESAS [Renesas Technology Corp]
Trang chủ  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

H8S/2463 bảng dữ liệu(HTML) 1010 Page - Renesas Technology Corp

Back Button H8S/2463 Datasheet HTML 1006Page - Renesas Technology Corp H8S/2463 Datasheet HTML 1007Page - Renesas Technology Corp H8S/2463 Datasheet HTML 1008Page - Renesas Technology Corp H8S/2463 Datasheet HTML 1009Page - Renesas Technology Corp H8S/2463 Datasheet HTML 1010Page - Renesas Technology Corp H8S/2463 Datasheet HTML 1011Page - Renesas Technology Corp H8S/2463 Datasheet HTML 1012Page - Renesas Technology Corp H8S/2463 Datasheet HTML 1013Page - Renesas Technology Corp H8S/2463 Datasheet HTML 1014Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 1010 / 1250 page
background image
Section 25 Flash Memory
Rev. 2.00 Aug. 20, 2008 Page 962 of 1198
REJ09B0403-0200
For the downloaded on-chip program area, refer to the RAM map for programming/erasing in
figure 25.12.
A single divided block is erased by one erasing processing. For block divisions, refer to figure
25.4. To erase two or more blocks, update the erase block number and perform the erasing
processing for each block.
1. Select the on-chip program to be downloaded
Set the EPVB bit in FECS to 1.
Several programming/erasing programs cannot be selected at one time. If several programs are
set, download is not performed and a download error is reported to the SS bit in the DPFR
parameter.
Specify the start address of a download destination by FTDAR.
The procedures to be carried out after setting FKEY, e.g. download and initialization, are the
same as those in the programming procedure. For details, refer to Programming Procedure in
User Program Mode in section 25.4.3 (2), Programming Procedure in User Program Mode.
The procedures after setting parameters for erasing programs are as follows:
2. Set the FEBS parameter necessary for erasure
Set the erase block number of the user MAT in the flash erase block select parameter FEBS
(general register ER0). If a value other than an erase block number of the user MAT is set, no
block is erased even though the erasing program is executed, and an error is returned to the
return value parameter FPFR.
3. Erasure
Similar to as in programming, there is an entry point of the erasing program in the area from
the start address of a download destination specified by FTDAR + 16 bytes of on-chip RAM.
The subroutine is called and erasing is executed by using the following steps.
MOV.L
#DLTOP+16,ER2
;
Set entry address to ER2
JSR
@ER2
;
Call erasing routine
NOP
•
The general registers other than R0L are held in the erasing program.
•
R0L is a return value of the FPFR parameter.
•
Since the stack area is used in the erasing program, a stack area of 128 bytes at the
maximum must be allocated in RAM.
4. The return value in the erasing program, FPFR (general register R0L) is determined.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com