| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
H8S/2426 bảng dữ liệu(PDF) 244 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/2426 bảng dữ liệu(HTML) 244 Page - Renesas Technology Corp |
|
244 / 1302 page ![]() Section 6 Bus Controller (BSC) Rev. 1.00 Sep. 19, 2008 Page 216 of 1270 REJ09B0466-0100 6.7 DRAM Interface In this LSI, external space areas 2 to 5 can be designated as DRAM space, and DRAM interfacing performed. The DRAM interface allows DRAM to be directly connected to this LSI. A DRAM space of 2, 4, or 8 Mbytes can be set by means of bits RMTS2 to RMTS0 in DRAMCR. Burst operation is also possible, using fast page mode. 6.7.1 Setting DRAM Space Areas 2 to 5 are designated as DRAM space by setting bits RMTS2 to RMTS0 in DRAMCR. The relation between the settings of bits RMTS2 to RMTS0 and DRAM space is shown in table 6.5. Possible DRAM space settings are: one area (area 2), two areas (areas 2 and 3), four areas (areas 2 to 5), and continuous area (areas 2 to 5). Table 6.5 Relation between Settings of Bits RMTS2 to RMTS0 and DRAM Space RMTS2 RMTS1 RMTS0 Area 5 Area 4 Area 3 Area 2 0 1 Normal space Normal space Normal space DRAM space 0 Normal space Normal space DRAM space DRAM space 0 1 1 DRAM space DRAM space DRAM space DRAM space 0 Continuous synchronous DRAM space* 0 1 Mode register settings of synchronous DRAM* 0 Reserved (setting prohibited) 1 1 1 Continuous DRAM space Continuous DRAM space Continuous DRAM space Continuous DRAM space Note: * Reserved (setting prohibited) in the H8S/2426 Group and H8S/2424 Group. With continuous DRAM space, RAS2 is valid. The bus specifications (bus width, number of wait states, etc.) for continuous DRAM space conform to the settings for area 2. 6.7.2 Address Multiplexing With DRAM space, the row address and column address are multiplexed. In address multiplexing, the size of the shift of the row address is selected with bits MXC2 to MXC0 in DRAMCR. Table 6.6 shows the relation between the settings of MXC2 to MXC0 and the shift size. The MXC2 bit should be cleared to 0 when the DRAM interface is used. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |