công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

H8S/2426 bảng dữ liệu(PDF) 397 Page - Renesas Technology Corp

tên linh kiện H8S/2426
Giải thích chi tiết về linh kiện  16-Bit Single-Chip Microcomputer H8S Family / H8S/2400 Series
PDF  1302 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  RENESAS [Renesas Technology Corp]
Trang chủ  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

H8S/2426 bảng dữ liệu(HTML) 397 Page - Renesas Technology Corp

Back Button H8S/2426 Datasheet HTML 393Page - Renesas Technology Corp H8S/2426 Datasheet HTML 394Page - Renesas Technology Corp H8S/2426 Datasheet HTML 395Page - Renesas Technology Corp H8S/2426 Datasheet HTML 396Page - Renesas Technology Corp H8S/2426 Datasheet HTML 397Page - Renesas Technology Corp H8S/2426 Datasheet HTML 398Page - Renesas Technology Corp H8S/2426 Datasheet HTML 399Page - Renesas Technology Corp H8S/2426 Datasheet HTML 400Page - Renesas Technology Corp H8S/2426 Datasheet HTML 401Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 397 / 1302 page
background image
Section 7 DMA Controller (DMAC)
Rev. 1.00 Sep. 19, 2008 Page 369 of 1270
REJ09B0466-0100
(4)
Full Address Mode (Block Transfer Mode)
Figure 7.21 shows a transfer example in which
TEND output is enabled and word-size full address
mode transfer (block transfer mode) is performed from internal 16-bit, 1-state access space to
external 16-bit, 2-state access space.
DMA
read
Address bus
φ
RD
LWR
TEND
HWR
Bus release
Block transfer
Last block transfer
DMA
write
DMA
read
DMA
write
DMA
dead
DMA
read
DMA
write
DMA
read
DMA
write
DMA
dead
Bus
release
Bus release
Figure 7.21 Example of Full Address Mode Transfer (Block Transfer Mode)
A one-block transfer is performed for a single transfer request, and after the transfer the bus is
released. While the bus is released, one or more bus cycles are executed by the CPU or DTC.
In the transfer end cycle of each block (the cycle in which the transfer counter reaches 0), a one-
state DMA dead cycle is inserted after the DMA write cycle. Even if an NMI interrupt is
generated during data transfer, block transfer operation is not affected until data transfer for one
block has ended.
(5)
DREQ Pin Falling Edge Activation Timing
Set the DTA bit in DMABCRH to 1 for the channel for which the
DREQ pin is selected.
Figure 7.22 shows an example of normal mode transfer activated by the
DREQ pin falling edge.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com