| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
R8C bảng dữ liệu(PDF) 182 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
R8C bảng dữ liệu(HTML) 182 Page - Renesas Technology Corp |
|
182 / 199 page ![]() R8C/10 Group 19. Usage Notes Rev.1.20 Jan 27, 2006 page 172 of 180 REJ09B0019-0120 Mode EW1 Status During auto- matic erasing (erase-sus- pend func- tion is en- abled) When maskable interrupt request is acknowledged The auto-erasing is sus- pended and the interrupt pro- cess is executed. The auto- erasing can be restarted by setting the FMR41 bit in the FMR4 register to “0” (erase restart) after the interrupt process completes The auto-erasing has a prior- ity and the interrupt request acknowledgement is waited. The interrupt process is ex- ecuted after the auto-erasing completes The auto-programming has a priority and the interrupt re- quest acknowledgement is waited. The interrupt process is executed after the auto- programming completes When watchdog timer, oscillation stop detection and voltage detection interrupt request area acknowledged Once an interrupt request is acknowledged, the auto-programming or auto-erasing is forc- ibly stopped and resets the flash memory. An interrupt process starts after the fixed period and the flash memory restarts. Since the block during the auto-erasing or the address during the auto-programming is forcibly stopped, the normal value may not be read. Execute the auto-erasing again and ensure the auto-eras- ing is competed normally. Since the watchdog timer does not stop during the command op- eration, the interrupt request may be gener- ated. Reset the watchdog timer regularly using the erase-suspend function. Table 19.2 Interrupt in EW1 Mode During auto- matic erasing (erase-sus- pend func- tion is dis- abled) Auto pro- gramming NOTES: 1. Do not use the address match interrupt while the command is executed because the vector of the address match interrupt is allocated on ROM. 2. Do not use the non-maskable interrupt while Block 0 is automatically erased because the fixed bector is allocated Block 0. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |