STE2007DIE2 datasheet(46/62 Pages) STMICROELECTRONICS

tên linh kiện	STE2007DIE2

Giải thích chi tiết về linh kiện	96 x 68 Single-chip LCD controller/driver

PDF	62 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

46 / 62 page

Commands

STE2007

46/62

8.6

Display start line address set

This command is used to specify the display start line address of the DDRAM.

If the display start line address is changed dynamically using this command, then screen

scrolling, page swapping can be performed.

Table 24.

Display start line address set

Display start line assress con be used in partial dispaly mode to relocate the partial display

window on the screen.

Display start line + Partial Display area with must be smaller or equal to the number of line

selected.

8.7

Segment driver direction select

This command can reverse the correspondence between the DDRAM column address and

the segment driver output.

Table 25.

Segment driver direction select

8.8

Common driver direction select

This command can reverse the correspondence between the DDRAM line address and the

common driver output.

Table 26.

Common driver direction select

* Disabled bit

(D/C)

D6D5D4D3

D2D1D0

HEX

Setting

1000

000

1000

001

1000

010

1111

110

3EH

1111

111

3FH

(D/C)

D6D5

D4D3D2D1

HEX

Setting

Normal

Reverse

(D/C)

D7D6D5

D4D3D2

D1D0

Setting

110

Normal

Reverse

STE2007DIE2 bảng dữ liệu(PDF) 46 Page - STMicroelectronics

STE2007DIE2 bảng dữ liệu(HTML) 46 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62

bảng dữ liệu tải về

Link URL