TDA7540N datasheet(27/76 Pages) STMICROELECTRONICS

27 / 76 page

TDA7540N

Functional description

27/76

Functional description

4.1

FM section

4.1.1

Mixer1, AGC and 1.IF

FM quadrature I/Q-mixer converts FM RF to IF1 of 10.7MHz. The mixer provides inherent

image rejection and wide dynamic range with low noise and large input signal performance.

The mixer1 tank can be adjusted by software (IF1T). For accurate image rejection the

phase-error of I/Q can be compensated by software (PH)

It is capable of tuning the US FM, US weather, Europe FM, Japan FM and East Europe FM

bands

–

US FM = 87.9 to 107.9 MHz

–

US weather = 162.4 to 162.55 MHz

–

Europe FM = 87.5 to 108 MHz

–

Japan FM = 76 to 91 MHz

–

East Europe FM = 65.8 to 74 MHz

The AGC operates on different sensitivities and bandwidths in order to improve the input

sensitivity and dynamic range. AGC thresholds are programmable by software

(RFAGC,IFAGC,KAGC). The output signal is a controlled current for pin diode attenuator.

A 10.7MHz programmable amplifier (IFG1) correct the IF ceramic insertion loss and the

costumer level plan application.

4.1.2

Mixer2, limiter and demodulator

In this 2nd mixer stage the first 10.7MHz IF is converted into the second 450kHz IF. A multi-

stage limiter generates signals for the complete integrated demodulator including spike

cancellation (DNB). MPX output DC offset versus noise DC level is correctable by software

(DEM), if tuner softmute is activated.

4.1.3

Quality detection and ISS

Fieldstrength

Parallel to mixer2 input a 10.7MHz limiter generates a signal for digital IF counter and a

fieldstrength output signal. This internal unweighted fieldstrength is used for keying AGC,

adjacent channel and multipath detection and is available at PIN22 (FSU) after +6dB buffer

stage. It is possible to combinate the IF counter result with this FSU via programmable

comparator (SSTH). The behaviour of FSU signal can be corrected for DC offset (SL) and

slope (SMSL). The generated unweighted fieldstrength is externally filtered and used for

softmute function and generation of ISS filter switching signal for weak input level (sm).

Adjacent channel detector

The input of the adjacent channel detector is AC coupled from internal unweighted

fieldstrength. A programmable highpass or bandpass (ACF) and amplifier (ACG) as well as

rectifier determines the influences. This voltage is compared with adjustable comparator1

thresholds (ACWTH, ACNTH). The output signal of this comparator generates a DC level at

PIN27 by programmable time constant. Time control (TISS) for a present adjacent channel

TDA7540N bảng dữ liệu(PDF) 27 Page - STMicroelectronics

TDA7540N bảng dữ liệu(HTML) 27 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

bảng dữ liệu tải về

Link URL