AT89C51CC03U-RDTIM datasheet(119/183 Pages) ATMEL

119 / 183 page

119

AT89C51CC03

4182B–CAN–09/03

Table 81. CANIDM4 Register for V2.0 part B

CANIDM4 for V2.0 part B (S:C7h)

CAN Identifier Mask Registers 4

Note:

The ID Mask is only used for reception.

No default value after reset.

Table 82. CANMSG Register

CANMSG (S:A3h)

CAN Message Data Register

No default value after reset.

7654

3210

IDMSK 4

IDMSK 3

IDMSK 2

IDMSK 1

IDMSK 0

RTRMSK

IDEMSK

Bit

Number

Bit Mnemonic Description

7-3

IDMSK4:0

IDentifier Mask Value

0 - comparison true forced.

1 - bit comparison enabled.

See Figure 50.

2RTRMSK

Remote Transmission Request Mask Value

0 - comparison true forced.

1 - bit comparison enabled.

Reserved

The value read from this bit is indeterminate. Do not set this bit.

0IDEMSK

IDentifier Extension Mask Value

0 - comparison true forced.

1 - bit comparison enabled.

7654

3210

MSG 7MSG 6MSG 5MSG 4

MSG 3MSG 2

MSG 1MSG 0

Bit

Number

Bit Mnemonic Description

7-0

MSG7:0

Message Data

This register contains the mailbox data byte pointed at the page message

object register.

After writing in the page message object register, this byte is equal to the

specified message location (in the mailbox) of the pre-defined identifier +

index. If auto-incrementation is used, at the end of the data register writing or

reading cycle, the mailbox pointer is auto-incremented. The range of the

counting is 8 with no end loop (0, 1,..., 7, 0,...)

AT89C51CC03U-RDTIM bảng dữ liệu(PDF) 119 Page - ATMEL Corporation

AT89C51CC03U-RDTIM bảng dữ liệu(HTML) 119 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL