ST6391 datasheet(11/68 Pages) STMICROELECTRONICS

11 / 68 page

ST639x CORE

The Core of the ST639x Family is implemented inde-

pendently from the I/O or memory configuration.

Consequently, it can be treated as an independent

central processor communicating with I/O and mem-

ory via internal addresses, data, and control busses.

The in-core communication is arranged as shown

in the following block diagram figure; the controller

being externally linked to both the reset and the os-

cillator, while the core is linked to the dedicated on-

chip macrocells peripherals via the serial data bus

and indirectly for interrupt purposes through the

control registers.

Registers

The ST639x Family Core has five registers and

three pairs of flags available to the programmer.

They are shown in Figure 5 and are explained in

the following paragraphs together with the pro-

gram and data memory page registers.

Accumulator (A). The accumulator is an 8-bit gen-

eral purpose register used in all arithmetic calcula-

tions, logical operations, and data manipulations.

The accumulator is addressed in the data space as

RAM location at the FFh address.

Accordingly, the ST639x instruction set can use

the accumulator as any other register of the data

space.

Figure 5. ST639x Core Block Diagram

SHORT

DIRECT

ADDRESSING

MODE

V REGISTER

W REGISTER

PROGRAM COUNTER

SIX LEVELS

STACK REGISTER

NORMAL FLAGS

INTERRUPT FLAGS

NMI FLAGS

INDEX

VA000423

b11

ACCUMULATOR

Y REG. POINTER

X REG. POINTER

Figure 6. ST639x Core Programming Model

ST6391,92,93,95,97,99

7/64

ST6391 bảng dữ liệu(PDF) 11 Page - STMicroelectronics

ST6391 bảng dữ liệu(HTML) 11 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

bảng dữ liệu tải về

Link URL