ST6365 datasheet(63/84 Pages) STMICROELECTRONICS

63 / 84 page

63/84

ST6365, ST6375, ST6385 ST6367, ST6377, ST6387

6 ELECTRICAL CHARACTERISTICS

6.1 ABSOLUTE MAXIMUM RATINGS

This product contains devices to protect the inputs

against damage due to high static voltages, how-

ever it is advised to take normal precaution to

avoid application of any voltage higher than maxi-

mum rated voltages.

For proper operation it is recommended that VI

and VO must be higher than VSS and smaller than

VDD. Reliability is enhanced if unused inputs are

connected to an appropriated logic voltage level

(VDD or VSS).

Power Considerations.The average chip-junc-

tion temperature, Tj, in Celsius can be obtained

from:

Tj=

TA + PD x RthJA

Where: TA =

Ambient Temperature.

RthJA =Package thermal resistance

(junction-to ambient).

PD =

Pint + Pport.

Pint =

IDD x VDD (chip internal pow-

er).

Pport = Port power dissipation

(determined by the user).

Note: Stresses above those listed as

“absolute maximum ratings” may cause permanent damage to the device. This is a stress rating only

and functional operation of the device at these conditions is not implied. Exposure to maximum rating conditions for extended periods may

affect device reliability.

THERMAL CHARACTERISTICS

6.2 RECOMMENDED OPERATING CONDITIONS

EEPROM INFORMATION

The ST63xx EEPROM single poly process has been specially developed to achieve 300.000 Write/Erase

cycles and a 10 years data retention.

Symbol

Parameter

Value

Unit

VDD

Supply Voltage

-0.3 to 7.0

Input Voltage (AFC IN)

VSS - 0.3 to +13

Input Voltage (Other inputs)

VSS - 0.3 to VDD + 0.3

Output Voltage (PA4-PA7, PC4-PC7, DA0-DA5)

VSS - 0.3 to +13

Output Voltage (Other outputs)

VSS - 0.3 to VDD + 0.3

Current Drain per Pin Excluding VDD, VSS, PA6, PA7

+ 10

Current Drain per Pin (PA6-PA7)

+ 50

IVDD

Total Current into VDD (source)

IVSS

Total Current out of VSS (sink)

150

Junction Temperature

150

°C

TSTG

Storage Temperature

-60 to 150

°C

Symbol

Parameter

Test Conditions

Value

Unit

Min.

Typ.

Max.

RthJA

Thermal Resistance

PSDIP42

°C/W

Symbol

Parameter

Test Conditions

Value

Unit

Min.

Typ.

Max.

Operating Temperature

1 Suffix Versions

°C

VDD

Operating Supply Voltage

4.5

5.0

6.0

fOSC

Oscillator Frequency

RUN & WAIT Modes

8.1

MHz

fOSDOSC

On-screen Display Oscillator Frequency

8.0

MHz

ST6365 bảng dữ liệu(PDF) 63 Page - STMicroelectronics

ST6365 bảng dữ liệu(HTML) 63 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

bảng dữ liệu tải về

Link URL