công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

EVAL-ADATE304BBCZ bảng dữ liệu(PDF) 8 Page - Analog Devices

tên linh kiện EVAL-ADATE304BBCZ
Giải thích chi tiết về linh kiện  Evaluating the ADATE304 200 MHz Dual Integrated DCL with Level Setting DACs, Per Pin PMU, and Per Chip VHH
PDF  18 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  AD [Analog Devices]
Trang chủ  http://www.analog.com
Logo AD - Analog Devices

EVAL-ADATE304BBCZ bảng dữ liệu(HTML) 8 Page - Analog Devices

Back Button EVAL-ADATE304BBCZ Datasheet HTML 4Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 5Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 6Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 7Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 8Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 9Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 10Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 11Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 12Page - Analog Devices Next Button
Zoom Inzoom in Zoom Outzoom out
 8 / 18 page
background image
User Guide
EVAL-ADATE304
EVALUATION BOARD SOFTWARE
analog.com
Rev. 0 | 8 of 18
SOFTWARE OPERATION
The software provides a graphical user interface to control the
ADATE304 serial bus. The serial bus provides control for the inter-
nal DAC levels and modes of operation of the device, as described
in the ADATE304 data sheet. Windows 7 SP1 is required at a
minimum. No Mac version is currently available.
To start the ADATE304 Evaluation Board Software, follow these
steps:
1. Use the Windows search feature to find the ADATE304 Evalua-
tion Board Software.
2. When the search displays the ADATE304 Evaluation Board
Software, select it. The main ADATE304 Evaluation Board
Software window opens as shown in Figure 4. Load the
adate304_default.sbus file after startup.
The main ADATE304 Evaluation Board Software window pro-
vides controls for the main functions of the ADATE304, including
access to the DAC registers. The main window of the ADATE304
Evaluation Board Software also includes the following panels:
►
The ADATE304 DAC levels panel allows the user to write to the
DACs within the ADATE304.
►
The single read and write panel allows the user to write single
word commands and single register readbacks to or from the
ADATE304 if so desired.
►
The mode selection controls panel located on the right side of
the GUI (see Figure 12), allows the user to configure the settings
of the ADATE304.
►
The FT reset and clock speed controls are located in the lower
right of the GUI (see Figure 4).
DAC LEVELS
The ADATE304 DAC levels panel, located in the upper-left corner
of the user interface, lists all the current settings of the DACs within
the ADATE304 (see Figure 9). Each channel has their individual
registers, which means each register can be edited individually.
Single Write button in Figure 10 can be used to write on both
channels at the same time. DAC values in the DAC levels panel
can also be changed in real time by clicking on the up-down arrows
in the corresponding box. If a Voltage value is selected with the
cursor and a value typed into the window, it is changed when either
the mouse is clicked on the entry value or the enter key on the
keyboard is pressed. Note that the DAC levels or Voltage is limited
to the numbers stated in the data sheet. Typing a greater or lesser
value than the maximum or minimum value prompts the software
to write the maximum or minimum value instead. This is true for
Address, CH, and Data as well on single writes/reads. Either the
DAC levels or Voltage can be changed and the other changes
accordingly.
Figure 9. ADATE304 DAC Levels Panel
LOAD FILE SETTINGS
The Load Settings and Save Settings panel allows the user to
load or save register settings for all DAC and control registers for
quicker testing, by clicking the Load Settings button or the Save
Settings button (see Figure 10).
The Load Settings button prompts the user to choose a previously
created setup file. The file updates the GUI and writes changed
values out to the ADATE304. All DAC Level values and all mode
controls can be saved by clicking the Save Settings button. The
user is prompted to provide a file name under which all the settings
are saved.
In the lower left section, clicking on the Single Write button writes
the data-word shown in the controls (CH, Address, Data) to the
serial bus of ADATE304. The values of the controls can be man-
ually changed by placing the cursor in the box and clicking and
entering the desired value. The Address and Data controls are in
hex while CH is in binary. Inputs on CH can be same with the binary
stated on the data sheet. Changes made using single write updates
the software corresponding to that change. All inputs made to the
controls are written to the device when the Single Write button is
clicked.
The Single Read button reads back the register that is addressed
in its Address text box. The data is shown only in the RDATA
indicator, and it is in hexadecimal format only.
The Read All button reads back the corresponding register value
from the ADATE304 and displays it in the software. This button can
be used to check if the chip and the software settings are in sync.
Figure 10. Load Settings, Save Settings, Single Read, Single Write, and Read
All



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com