công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

EVAL-ADATE304BBCZ bảng dữ liệu(PDF) 6 Page - Analog Devices

tên linh kiện EVAL-ADATE304BBCZ
Giải thích chi tiết về linh kiện  Evaluating the ADATE304 200 MHz Dual Integrated DCL with Level Setting DACs, Per Pin PMU, and Per Chip VHH
PDF  18 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  AD [Analog Devices]
Trang chủ  http://www.analog.com
Logo AD - Analog Devices

EVAL-ADATE304BBCZ bảng dữ liệu(HTML) 6 Page - Analog Devices

Back Button EVAL-ADATE304BBCZ Datasheet HTML 2Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 3Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 4Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 5Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 6Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 7Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 8Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 9Page - Analog Devices EVAL-ADATE304BBCZ Datasheet HTML 10Page - Analog Devices Next Button
Zoom Inzoom in Zoom Outzoom out
 6 / 18 page
background image
User Guide
EVAL-ADATE304
EVALUATION BOARD HARDWARE
analog.com
Rev. 0 | 6 of 18
POWER SUPPLIES
Provide the following external power supplies:
►
21 V between +21 V DC and GND
►
−10 V between −10 V DC and GND
The GND input is provided on the EVAL-ADATE304BBCZ. Each
device supply is decoupled to GND with a 10 μF and 0.1 μF
capacitor. Each device supply pin is again decoupled with a 0.1
μF capacitor to GND (see the Evaluation Board Schematics and
Artwork section for reference).
DEFAULT JUMPER SETUP
The default setup is for control by the PC through the USB port.
The default link options are listed in Table 1.
Table 1. Default Jumper Setup
Jumper Name
Default
Function
VPLUS_ JMPR
Inserted
Current measurement terminal for VPLUS (0.1 Ω sense resistor)
VCC_JMPR
Inserted
Current measurement terminal for VCC (0.1 Ω sense resistor)
VDD_JMPR
Inserted
Current measurement terminal for VDD (0.1 Ω sense resistor)
VSS_JMPR
Inserted
Current measurement terminal for VSS (0.1 Ω sense resistor)
SET_RANGE1_JMPR
Inserted
Sets the power supply range to Range 1
VTT_JMPR
Inserted
Current measurement terminal for VTT (0.1 Ω sense resistor)
DUTGND_JMPR
Inserted
Connects the device DUTGND to AGND plane
P1
Pin 1 to Pin 2
Controls the multiplexers output for read or write bit LED display
P8
Pin 1 to Pin 2
SCLK source select, on-board (default) or external
P9
Pin 1 to Pin 2
SDI source select, on-board (default) or external
P10
Pin 1 to Pin 2
RST source select, on-board (default) or external
P11
Pin 1 to Pin 2
Connects the device SDO to on-board microcontroller
P12
Pin 1 to Pin 2
CS source select, on-board (default) or external



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com