| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ADMV4530 bảng dữ liệu(PDF) 10 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADMV4530 bảng dữ liệu(HTML) 10 Page - Analog Devices |
|
10 / 64 page ![]() Data Sheet ADMV4530 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS analog.com Rev. C | 10 of 64 Table 7. Pin Function Descriptions (Continued) Pin No. Mnemonic Description 32 VCC_LDO Supply Voltage for the Internal LDO Regulator, 3.3 V. Place a 1 µF decoupling capacitor close to this pin. 33 VCC_CP Supply Voltage for the Charge Pump, 3.3 V. Place a 1 µF decoupling capacitor close to this pin. 34 RST Reset. 3.3 V logic. Active low. 35 REF_IN PLL Reference Input. Apply an external reference signal to this pin with a 0.01 µF, dc blocking capacitor. Refer to Figure 90 for the external reference input configuration. 36 VCC_1P8V Supply Voltage for the SPI Block, 1.8 V. Place a 1 µF decoupling capacitor close to this pin. The voltage on VCC_1P8V must be applied at the same time or after all other supply pin voltages have been applied. 37, 39 GND Ground. Connect these pins to RF and dc ground. 38 RFOUT RF Output. This pin has a 50 Ω output impedance. EPAD Exposed Pad. Connect the exposed pad to RF and dc ground. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |