2023/10/12 10:58

DFRobot Monochrome_0.96_128x64_IIC_SPI_OLED_Display_SKU_DFR0650

https://wiki.dfrobot.com/Monochrome_0.96_128x64_IIC_SPI_OLED_Display_SKU_DFR0650

1/25

SKU:DFR0650 (https://www.dfrobot.com/product-2017.html?search=DFR0650&description=true)

(https://www.dfrobot.com/product-2017.html?search=DFR0650&description=true)

Introduction

This 0.96"OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ IIC,

IIC in default. With its high contrast, simple wiring and low power consumption, it can be applied to many display applications, such as wearable display

devices, Mini small game consoles, desktop widgets, etc.

This 0.96" OLED display module supports both 3.3V and 5V. The display module adopts a high-contrast, low-power OLED display. It is compatible with

controllers such as Arduino UNO, Leonardo, ESP32/ESP8266, FireBettle-M0 and so on. Internal power-on reset processing, IIC communication methods,

so that your welding line will be more convenient and simpler. Power-on reset is supported, so the Res pin is not elicited. This is a Breakout display

module that fits perfectly with the breadboard when you weld the pin. If you want to change IIC communication to SPI, you just need to change the 0Ohm

resistor position.