LD154DR

T: +44 (0)1322 527 629

E: light@lightgraphix.co.uk

www.lightgraphix.co.uk

Page 4 of 8 | Data sheet issued: 18 June 2026

DIMENSIONS AND FIXING OPTIONS

Dimensions in mm

GLARE CONTROL OPTIONS

/SC Spring Clips

Suitable for use in surfaces with a thickness of 1mm –

25mm. Spring clips provide a simple, single fix mounting

method. We recommend that spring clips are only used in

interior applications.

/485S Fixing sleeve and O-rings

Acetal sleeve is bonded into the mounting surface first

and the fitting is held in with O-rings. We recommend this

method for mounting in exterior in-ground applications.

/485GT Ground Tube

Designed for soil or gravel surfaces. It is supplied with the

fixing sleeve bonded into the tube and can be cut down on

site. The tube can be buried with the necessary wiring via

the PG9 IP67 gland and then the fitting installed after the

landscaping work has been completed.

/486N Concrete Housing

The aluminium housing is used as a heat sink which keeps the LED fitting cool through the thermal transfer of the heat within the housing to the surrounding concrete. The housings are big

enough for IP rated connections to be made inside and a second gland is available for cabling onto the next luminaire.

/486N

Concrete housing with 1x PG9 IP67 gland

/486N-2

Concrete housing with 2x PG9 IP67 gland

/486N

Concrete Can Housing

3

141

Ø170

24

Ø100

Ø100

Ø170

141

3

24

/SC

Mounting Springs

85 99

Ø80

Cut-out Ø86

3

39

Ø100

3

85 99

Ø80

Cut-out Ø86

39

/485S

Mounting Sleeve

Ø100

/484GT

Ground Tube

3

120

Ø100

Ø100

Ø100

Ø100

Ø80

Ø80

Cut-out Ø86

Cut-out Ø86

3

3

85

85

120

99

99

39

39

3

/GSHM154

Half-moon glare shield

For applications that require low

glare. Lumen output is typically

reduced by 60% with no light lost

on the lit surface.

/GSOB154

Oval beam glare shield

Reduces the angles at which glare

is visible without compromising

the oval output of the beam.

Useful when used in applications

where glare can be seen from two

sides, for example archways.

/HL

Honeycomb Louvre

Helps reduce glare from all

angles and can be used with

glare shields.

/GS154

Glare shield

Standard glare shield, which

provides an excellent balance

between glare control and light

output. This accessory works well

in most applications.

/NGS

No glare shield

No glare shield. Low glare optic

and matt black anodised optic

holder aids in glare reduction.