DLS360 datasheet(22/40 Pages) CLARKE

22 / 40 page

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

• Slide the nozzle forward for low pressure and backwards for high pressure.

ADJUSTING THE PRESSURE

There are 4 ways to adjust the pressure.

1. Adjust the pressure regulator on the

pump. Turn the pressure regulator

knob counter clockwise to lower

pressure. Once you have finished

using your power washer, return the

pressure regulator to its original

position.

2. Back away from the surface to be

cleaned. The further away you are,

the less the pressure will be on the

surface being cleaned.

3. Reduce the speed of the engine (RPM). Slow the engine down and the water

pressure will also go down.

4. Adjust the spray to a wider angle.

• Slide the nozzle forward for low pressure and backwards for high pressure.

APPLYING DETERGENTS AND CLEANING SOLVENTS

NOTE: Use only detergents designed for pressure washers; household detergents,

acids, alkalines, bleach, solvents, flammable material or industrial grade

solutions can damage the pump. Many detergents may require mixing prior to

use. Prepare the cleaning solution as instructed on the solution bottle.

DLS360 bảng dữ liệu(PDF) 22 Page - Clarke International