| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
RA4C1 bảng dữ liệu(PDF) 84 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
RA4C1 bảng dữ liệu(HTML) 84 Page - Renesas Technology Corp |
|
84 / 97 page ![]() Table 2.72 Code flash characteristics (3) (2 of 2) Middle-speed operating mode Conditions: VCC = AVCC0 = 1.6 to 3.6 V Parameter Symbol ICLK = 1 MHz ICLK = 8 MHz*1 Unit Min Typ Max Min Typ Max Blank check time 8-byte tBC8 — — 67.7 — — 13.3 µs 2-KB tBC2K — — 7538 — — 947 µs Erase suspended time tSED — — 33.4 — — 13.1 µs Forced stop time tFD — — 33.4 — — 13.1 µs Configuration Set time tCFGS — 27 494 — 12 277 ms Flash memory mode transition wait time 1 tDIS 2 — — 2 — — µs Flash memory mode transition wait time 2 tMS 15 — — 15 — — µs Note: Does not include the time until each operation of the flash memory is started after instructions are executed by software. Note: The lower-limit frequency of FCLK is 1 MHz during programming or erasing the flash memory. Note: The frequency accuracy of FCLK must be ± 1.0% during programming or erasing the flash memory. Confirm the frequency accuracy of the clock source. Note 1. When 1.8 V ≤ VCC = AVCC0 ≤ 3.6 V Table 2.73 Code flash characteristics (4) Low-speed operating mode Conditions: VCC = AVCC0 = 1.6 to 3.6 V Parameter Symbol ICLK = 1 MHz Unit Min Typ Max Programming time 8-byte tP8 — 128 1064 µs Erasure time 2-KB tE2K — 14.1 390 ms Blank check time 8-byte tBC8 — — 67.7 µs 2-KB tBC2K — — 7538 µs Erase suspended time tSED — — 33.4 µs Forced stop time tFD — — 33.4 µs Configuration Set time tCFGS — 27 494 ms Flash memory mode transition wait time 1 tDIS 2 — — µs Flash memory mode transition wait time 2 tMS 15 — — µs Note: Does not include the time until each operation of the flash memory is started after instructions are executed by software. Note: The lower-limit frequency of FCLK is 1 MHz during programming or erasing the flash memory. Note: The frequency accuracy of FCLK must be ± 1.0% during programming or erasing the flash memory. Confirm the frequency accuracy of the clock source. 2.13.2 Data Flash Memory Characteristics Table 2.74 Data flash characteristics (1) Parameter Symbol Min Typ Max Unit Conditions Reprogramming/erasure cycle*1 NDPEC 100000 1000000 — Times — Data hold time After 10000 times of NDPEC tDDRP 20*2 *3 — — Year Ta = +85 °C 10*2 *3 — — Ta = +105 °C After 100000 times of NDPEC 5*2 *3 — — Ta = +105 °C After 1000000 times of NDPEC — 1*2 *3 — Ta = +25 °C Note 1. The reprogram/erase cycle is the number of erasure for each block. When the reprogram/erase cycle is n times (n = 100,000), erasing can be performed n times for each block. For instance, when 1-byte programming is performed 256 times for different RA4C1 Datasheet 2. Electrical Characteristics R01DS0457EJ0110 Rev.1.10 Jul 4, 2025 Page 84 of 97 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |