| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
RA4C1 bảng dữ liệu(PDF) 34 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
RA4C1 bảng dữ liệu(HTML) 34 Page - Renesas Technology Corp |
|
34 / 97 page ![]() 2.3.1 Frequency Table 2.23 Operation frequency in high-speed operating mode Conditions: VCC = AVCC0 = 1.6 to 3.6 V Parameter Symbol Min Typ Max*4 Unit Operation frequency System clock (ICLK)*1 *2 1.8 to 3.6 V f 0.03277 — 80*5 MHz 1.6 to 1.8 V 0.03277 — 4 Peripheral module clock (PCLKA) 1.8 to 3.6 V — — 80*5 1.6 to 1.8 V — — 4 Peripheral module clock (PCLKB) 1.8 to 3.6 V — — 40 1.6 to 1.8 V — — 4 Peripheral module clock (PCLKC)*3 1.8 to 3.6 V — — 48 1.6 to 1.8 V — — 4 Peripheral module clock (PCLKD) 1.8 to 3.6 V — — 80*5 1.6 to 1.8 V — — 4 Flash IF clock (FCLK) 1.8 to 3.6 V — — 48 1.6 to 1.8 V — — 4 Note: Set LDOCR.CHG0 = 0 when ICLK < 8MHz, and LDOCR.CHG0 = 1 when 8MHz ≤ ICLK. Note 1. The lower-limit frequency of ICLK is 1 MHz while programming or erasing the flash memory. When using ICLK for programming or erasing the flash memory at below 4 MHz, the frequency can be set to 1 MHz, 2 MHz, or 3 MHz. A non-integer frequency such as 1.5 MHz cannot be set. Note 2. The frequency accuracy of ICLK must be ± 1.0% during programming or erasing the flash memory. Confirm the frequency accuracy of the clock source. Note 3. The lower-limit frequency of PCLKD is 1 MHz when the ADC12 is in use. Note 4. The maximum value of operation frequency does not include internal oscillator errors. For details on the range for guaranteed operation, see Table 2.27. Note 5. This is the condition when Tj = 105 °C. Specifications at Tj = 125 °C are 79.2 MHz. Table 2.24 Operation frequency in middle-speed mode Conditions: VCC = AVCC0 = 1.6 to 3.6 V Parameter Symbol Min Typ Max*4 Unit Operation frequency System clock (ICLK)*1 *2 1.8 to 3.6 V f 0.03277 — 8 MHz 1.6 to 1.8 V 0.03277 — 4 Peripheral module clock (PCLKA) 1.8 to 3.6 V — — 8 1.6 to 1.8 V — — 4 Peripheral module clock (PCLKB) 1.8 to 3.6 V — — 8 1.6 to 1.8 V — — 4 Peripheral module clock (PCLKC)*3 1.8 to 3.6 V — — 8 1.6 to 1.8 V — — 4 Peripheral module clock (PCLKD) 1.8 to 3.6 V — — 8 1.6 to 1.8 V — — 4 Flash IF clock (FCLK) 1.8 to 3.6 V — — 8 1.6 to 1.8 V — — 4 Note 1. The lower-limit frequency of ICLK is 1 MHz while programming or erasing the flash memory. When using ICLK for programming or erasing the flash memory at below 4 MHz, the frequency can be set to 1 MHz, 2 MHz, or 3 MHz. A non-integer frequency such as 1.5 MHz cannot be set. Note 2. The frequency accuracy of ICLK must be ± 1.0% during programming or erasing the flash memory. Confirm the frequency accuracy of the clock source. Note 3. The lower-limit frequency of PCLKC is 1 MHz when the ADC12 is in use. Note 4. The maximum value of operation frequency does not include internal oscillator errors. For details on the range for guaranteed operation, see Table 2.27. RA4C1 Datasheet 2. Electrical Characteristics R01DS0457EJ0110 Rev.1.10 Jul 4, 2025 Page 34 of 97 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |