| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TAS5706PAPR bảng dữ liệu(PDF) 44 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TAS5706PAPR bảng dữ liệu(HTML) 44 Page - Texas Instruments |
|
44 / 62 page ![]() www.ti.com ERROR STATUS REGISTER (0x02) SYSTEM CONTROL REGISTER 1 (0x03) TAS5706 SLOS550A – DECEMBER 2007 – REVISED DECEMBER 2007 Note that the error bits are sticky bits that are not cleared by the hardware. This means that the software must clear the register (write zeroes) and then read them to determine if there are any persistent errors. Table 5. Error Status Register (0x02) D7 D6 D5 D4 D3 D2 D1 D0 FUNCTION – – – – – – – – MCLK error – 1 – – – – – – PLL autolock error – – 1 – – – – – SCLK error – – – 1 – – – – LRCLK error – – – – 1 – – – Frame slip 0 0 0 0 0 0 0 0 No errors (1) (1) Default values are in bold. Note that the error bits are sticky bits that are not cleared by the hardware. This means that the software must clear the register (write zeroes) and then read them to determine if there are any persistent errors. Table 6. Error Status Register (0x02) D7 D6 D5 D4 D3 D2 D1 D0 FUNCTION – 1 – – – – – – PLL autolock error – – 1 – – – – – SCLK error – – – 1 – – – – LRCLK error – – – – 1 – – – Frame slip 0 0 0 0 0 0 0 0 No errors (1) (1) Default values are in bold. The system control register 1 has several functions: Bit D7: If 0, the dc-blocking filter for each channel is disabled. If 1, the dc-blocking filter (–3 dB cutoff <1 Hz) for each channel is enabled (default). Bit D5: If 0, use soft unmute on recovery from clock error. This is a slow recovery. If 1, use hard unmute on recovery from clock error (default). This is a fast recovery. Bit D3: If 0, clock autodetect is enabled (default). If 1, clock autodetect is disabled. Bit D2: If 0, soft start is enabled (default). If 1, soft start is disabled. Bits D1–D0: Select de-emphasis Table 7. System Control Register 1 (0x03) D7 D6 D5 D4 D3 D2 D1 D0 FUNCTION 0 – – – – – – – PWM high-pass (dc blocking) disabled 1 – – – – – – – PWM high-pass (dc blocking) enabled (1) – 0 – – – – – – Reserved (1) – – 0 – – – – – Soft unmute on recovery from clock error – – 1 – – – – – Hard unmute on recovery from clock error (1) – – – 0 – – – – Reserved (1) – – – – 0 – – – Enable clock autodetect (1) (1) Default values are in bold. 44 Submit Documentation Feedback Copyright © 2007, Texas Instruments Incorporated Product Folder Link(s): TAS5706 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |