216571 datasheet(13/23 Pages) MOLEX

13 / 23 page

PRODUCT SPECIFICATION

Micro-Fit + Connector System Web Page

TABLE OF CONTENTS

REVISION:

ECM INFORMATION:

TITLE:

MICRO-FIT + WTB PRODCUT SPEC

WIRE TO BOARD CONNECTOR SYSTEM

SHEET No.

EC No:

646943

13 of 23

DATE:

10/12/2020202

2/10/17

DOCUMENT NUMBER:

DOC

TYPE:

DOC

PART:

CREATED / REVISED BY:

CHECKED BY:

APPROVED BY:

2064600000-PS

000

ZIXUAQ

NCSR

TEMPLATE FILENAME: 1703070003 REV A

6.2

MECHANICAL PERFORMANCE

ITEM

DESCRIPTION

TEST CONDITION

REQUIREMENT

6.2.1

Connector

Mate and Un-mate

Forces

[Initial cycle]

Latch disabled

Mate and un-mate connector (male to female)

at a rate of 25 ± 6 mm (1 ± ¼ inch) per minute.

EIA-364-13E, Method A

Tin: 7.0 N (1.57 lbf)

MAXIMUM mate force

per circuit &

1.4 N (0.31 lbf)

MINIMUM un-mate force

per circuit;

Gold: 1.0 N (0.45 lbf)

MAXIMUM mate force

per circuit &

0.2 N (0.16 lbf)

MINIMUM un-mate force

per circuit.

6.2.2

Crimp Terminal

Retention Force

(in housing)

Axial pullout force on the terminal in the housing

at a rate of 25 ± 6 mm (1 ± ¼ inch) per minute.

EIA-364-29C, Method C

24.5 N (5.5 lbf)

MINIMUM retention force

6.2.3

Crimp Terminal

Insertion Force

(into Housing)

Apply an axial insertion force on the terminal at

a rate of 25 ± 6 mm (1 ± ¼ inch).

Per EIA-364-05

14.7 N (3.3 lbf)

MAXIMUM insertion force

6.2.4

Housing Locking

Mechanism Strength

Exert an axial force at a rate of 13 mm per

minute (0.5 inch per minute) to separate the

housing halves EIA-364-98

58 N MIN.

6.2.5

Durability

Mate connectors up to 25 cycles at a maximum

rate of 10 cycles per minute Per EIA-364-09

Tin: 20 milliohms

MAXIMUM

Gold: 10 milliohms

MAXIMUM

(change from initial)

6.2.6

Vibration

(Random)

Shock

(Mechanical)

EIA-364-1000

Test Group 3

(See section 7.0)

Mate connectors and vibrate per EIA 364-28,

test condition VII, Letter D. Test Duration:

15 minutes each axis.

Mate connectors and shock at 50 g's with ½

sine wave (11 milliseconds) shocks in the

±X, ±Y, ±Z axes (18 shocks total).

EIA-364-27, Test Condition H

Tin: 20 milliohms

MAXIMUM

Gold: 10 milliohms

MAXIMUM

(change from initial)

Discontinuity < 1

microsecond

216571 bảng dữ liệu(PDF) 13 Page - Molex Electronics Ltd.

216571 bảng dữ liệu(HTML) 13 Page - Molex Electronics Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

bảng dữ liệu tải về

Link URL