5 Specification

5.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)

MIN

MAX

UNIT

VCCA

Supply voltage

–0.5

4.6

V

VCCB

Supply voltage

–0.5

6.5

VI

Input voltage(2)

–0.5

6.5

V

VO

Voltage applied to any output in the high-impedance or power-off state(2)

–0.5

6.5

V

VO

Voltage applied to any output in the high or low state(2) (3)

A port

–0.5

VCCA + 0.5

V

B port

–0.5

VCCB + 0.5

IIK

Input clamp current

VI < 0

–50

mA

IOK

Output clamp current

VO < 0

–50

mA

IO

Continuous output current

±50

mA

Continuous current through VCCA, VCCB, or GND

±100

mA

TJMAX

Absolute maximum junction temperature

150

°C

Tstg

Storage temperature

–65

150

°C

(1)

Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply

functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions.

If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully

functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime

(2)

The input and output negative Voltage ratings may be exceeded if the input and output current ratings are observed.

(3)

The value of VCCA and VCCB are provided in the recommended operating conditions table.

5.2 ESD Ratings

VALUE

UNIT

TXB0101 Port A

V(ESD)

Electrostatic discharge

Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V

Charged-device model (CDM), per JEDEC specification JESD22-

C101(2)

±1500

TXB0101 Port B

V(ESD)

Electrostatic discharge

Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±15

kV

Charged-device model (CDM), per JEDEC specification JESD22-

C101(2)

±1500

V

(1)

JEDEC document JEP155 states that 500V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250V CDM allows safe manufacturing with a standard ESD control process.

www.ti.com

TXB0101

SCES639F – JANUARY 2007 – REVISED SEPTEMBER 2025

Copyright © 2025 Texas Instruments Incorporated

Submit Document Feedback

5

Product Folder Links: TXB0101