| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
DLPC6422ZPC bảng dữ liệu(PDF) 36 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
DLPC6422ZPC bảng dữ liệu(HTML) 36 Page - Texas Instruments |
|
36 / 46 page ![]() This filter can be common to all the PLLs. The voltage drop across the resistor is limited by the 1.1V 1.15V regulator tolerance and the DLPC6422 device voltage tolerance. A resistance of 0.36Ω and a 100µF ceramic are recommended. • The analog 1.8V PLL power pins must have a similar filter topology to the 1.1V 1.15V. In addition, it is recommended that the 1.8V be generated with a dedicated linear regulator. • When designing the overall supply filter network, care must be taken to ensure that no resonance occurs. Particular care must be taken around the 1MHz to 2MHz band, as this coincides with the PLL natural loop frequency. Figure 7-5. PLL Filter Layout DLPC6422 DLPS308A – JUNE 2025 – REVISED OCTOBER 2025 www.ti.com 36 Submit Document Feedback Copyright © 2025 Texas Instruments Incorporated Product Folder Links: DLPC6422 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |