| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AP47 bảng dữ liệu(PDF) 3 Page - Juniper Networks, Inc. |
|
|
|||||||||||||||||||||||||||||
AP47 bảng dữ liệu(HTML) 3 Page - Juniper Networks, Inc. |
|
3 / 12 page ![]() Analytics cloud services Juniper Mist Premium Analytics For network teams • Baseline analytics features come included with Wi-Fi Assurance, User Engagement, and Asset Visibility subscriptions • End-to-end network visibility • Orchestrated networking and application performance queries • Simplified network transparency For business teams • Baseline analytics features come included with Wi-Fi Assurance, User Engagement, and Asset Visibility subscriptions • Customer segmentation and reporting based on visitor telemetry • Customized1 Dwell and third-party reporting for traffic and trend analysis • Correlation of customer-guest traffic and trend analysis • Correlated customer-guest traffic and trend analysis Access Point Features High-Performance Wi-Fi The AP47 Series is a four ‑radio, 802.11be Wi‑Fi 7 access point. Three four ‑spatial stream data serving radios with maximum data rates of 11528 Mbps in the 6 GHz band, 5764 Mbps in the 5 GHz band, and 1376 Mbps in the 2.4 GHz band. A dedicated fourth tri ‑band scanning radio providing WIDS/WIPS, spectrum analysis, sensor and location analytics. With 802.11be Multi-Link Operation (MLO), Orthogonal Frequency Division Multiple Access (OFDMA), Multi ‑User Multiple Input Multiple Output (MU‑MIMO), and BSS Coloring technologies, the AP47 Series offers performance at unprecedented levels to support new bandwidth ‑hungry applications and soaring device densities. Wi-Fi 7 Amendment The new 802.11be amendment (Wi-Fi 7) expands the capabilities of Wi ‑Fi 6E, including the use of up to 1200 MHz of the 6 GHz band for higher throughput and improved application performance. New capabilities include 320 MHz channels which provides double the throughput, Multi ‑Link Operation (MLO) for more efficient load balancing and failover, Multi ‑Resource Units (Multi‑RU), preamble puncturing, and 4K QAM for higher transmission rates and better user experiences. Only Wi ‑Fi 7 and 6E client devices can use the 6 GHz band so there is no interference due to IoT or legacy devices. AP Redundancy Automation in Juniper Mist helps simplify the validation of AP placements and AP ‑switch uplinks for highly‑redundant coverage in mission ‑critical deployments. In addition, the AP47 provides high availability with two 10 Gbps Ethernet ports for seamless failover for both data and power. The dual ports provide business continuity for mission ‑critical applications. AI for AX Juniper automates and optimizes Wi ‑Fi 7 features with AI for AX capabilities to optimize BSS Coloring, improve data transmission scheduling within OFDMA and MU ‑MIMO, and assign clients to the best radio to boost the overall performance of the network. Improved IoT Operations The AP47 Series extends network monitoring and insights to vBLE, Thread*, Zigbee*, or Matter* to increase IoT capabilities with dual 802.15.4 radios for concurrent location services and electronic shelf labels (ESL). Ultra ‑wideband (UWB) ready. *future Greater Spectral Efficiency OFDMA improves spectral efficiency so that an increasing density of devices can be supported on the network. Density has become an issue with the rapid growth of IoT devices that often utilize smaller data packets than mobile devices and, hence, increase the burden and contention on the network. Additionally, BSS Coloring improves the coexistence of overlapping BSSs and allows spatial reuse within a given channel by reducing packet collisions. Automatic RF Optimization Reliable RF optimization is even more critical with the addition of 6GHz spectrum. Radio Resource Management uses a dedicated sensor radio to automate dynamic channel and power assignments, thus avoiding Wi ‑Fi and external sources of interference. The AI engine continuously monitors coverage and capacity SLE metrics to learn and optimize the RF environment. A learning algorithm uses hysteresis on a 24 ‑hour window to conduct a sitewide rebalancing for optimal channel and power assignment. The Automatic Frequency Coordination (AFC) mandated by the FCC specifies that when using the 6 GHz band (in the US) with either an access point that has a removable external antenna or a weatherized access point, it must operate in Standard Power (SP) mode. The AP47E ‑US access point will operate in SP mode on 6 GHz in the US, while the AP47 and AP47D access points will initially operate in Lower Power Indoor (LPI) mode, with the future AP47 Access Point Datasheet 3 |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |