7.4 Layout

7.4.1 Layout Guidelines

The TMF0008 only has one signal (SDQ). Routing the signal trace directly from the SDQ pin of TMF0008 to

the external connector of the application system or to host SDQ host device is advised. Shield the signal trace

properly with a parallel ground plane as shown in Figure 7-5. If a ground plane is not available to the TMF0008,

connect GND with a large trace surrounding most of the device and have the SDQ trace parallel with GND back

to the host.

7.4.2 Layout Example

Figure 7-5. Example Board Layout

TMF0008

SLVSIV3 – JULY 2025

www.ti.com

28

Submit Document Feedback

Copyright © 2025 Texas Instruments Incorporated

Product Folder Links: TMF0008