STM32WB10CCU5 datasheet(84/110 Pages) STMICROELECTRONICS

84 / 110 page

Electrical characteristics

STM32WB10CC

84/110

DS13259 Rev 2

to prevent unrecoverable errors occurring (see application note AN1015, available on

www.st.com).

Electromagnetic interference (EMI)

The electromagnetic field emitted by the device are monitored while a simple application is

executed (toggling two LEDs through the I/O ports). This emission test is compliant with the

IEC 61967-2 standard, which specifies the test board and the pin loading.

6.3.14

Electrical sensitivity characteristics

Based on three different tests (ESD, LU) using specific measurement methods, the device is

stressed to determine its performance in terms of electrical sensitivity.

Electrostatic discharge (ESD)

Electrostatic discharges (a positive then a negative pulse separated by 1 second) are

applied to the pins of each sample according to each pin combination. The sample size

depends on the number of supply pins in the device (3 parts × (n+1) supply pins). This test

conforms to the ANSI/JEDEC standard.

Static latch-up

Two complementary static tests are required on six parts to assess the latch-up

performance:



a supply overvoltage is applied to each power supply pin



a current injection is applied to each input, output and configurable I/O pin.

These tests are compliant with EIA/JESD 78A IC latch-up standard.

Table 57. EMI characteristics

Symbol

Parameter

Conditions

Monitored

frequency band

Peripheral ON

[fHSE / fCPUM4, fCPUM0]

Unit

32 MHz / 64 MHz, 32 MHz

SEMI

Peak level

VDD = 3.6 V, TA = 25 °C,

UFQFN48 package



compliant with IEC 61967-2

0.1 MHz to 30 MHz

dBµV

30 MHz to 130 MHz

130 MHz to 1 GHz

1 GHz to 2 GHz

EMI level

1.5

Table 58. ESD absolute maximum ratings

Symbol

Ratings

Conditions

Class

Maximum value(1) Unit

VESD(HBM)

Electrostatic discharge voltage

(human body model)

TA = +25 °C, conforming to

ANSI/ESDA/JEDEC JS-001

2000

VESD(CDM)

Electrostatic discharge voltage

(charge device model)

TA = +25 °C, conforming to

ANSI/ESD STM5.3.1 JS-002

C2a

500

1. Evaluated by characterization, not tested in production.

STM32WB10CCU5 bảng dữ liệu(PDF) 84 Page - STMicroelectronics

STM32WB10CCU5 bảng dữ liệu(HTML) 84 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL