13

13.2

13.4

13.6

13.8

14

14.2

14.4

14.6

14.8

15

0

10

20

30

40

50

60

70

Temperature (

ƒC)

C004

9

SN74LS07

www.ti.com

SDLS021D – MAY 1990 – REVISED APRIL 2016

Product Folder Links: SN74LS07

Submit Documentation Feedback

Copyright © 1990–2016, Texas Instruments Incorporated

Typical Application (continued)

9.2.3 Application Curve

Figure 5. tPHL vs Temperature

10 Power Supply Recommendations

The power supply can be any voltage between the minimum and maximum supply voltage rating indicated in

Recommended Operating Conditions.

Each VCC pin must have a good bypass capacitor to prevent power disturbance. For devices with a single supply,

TI recommends a 0.1-µF capacitor; if there are multiple VCC pins, then TI recommends either a 0.01-µF or

0.022-µF capacitor for each power pin. It is acceptable to parallel multiple bypass capacitors to reject different

frequencies of noise. A 0.1-µF and a 1-µF capacitor are commonly used in parallel. The bypass capacitor must

be installed as close to the power pin as possible for best results.