| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PIC32MM0016GPL028 bảng dữ liệu(PDF) 23 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC32MM0016GPL028 bảng dữ liệu(HTML) 23 Page - Microchip Technology |
|
23 / 268 page ![]() 2015-2016 Microchip Technology Inc. DS60001324B-page 23 PIC32MM0064GPL036 FAMILY 3.0 CPU The MIPS32® microAptiv™ UC microprocessor core is the heart of the PIC32MM0064GPL036 family devices. The CPU fetches instructions, decodes each instruction, fetches source operands, executes each instruction and writes the results of the instruction execution to the proper destinations. 3.1 Features The PIC32MM0064GPL036 family processor core key features include: • 5-Stage Pipeline • 32-Bit Address and Data Paths • MIPS32 Enhanced Architecture: - Multiply-add and multiply-subtract instructions - Targeted multiply instruction - Zero and one detect instructions - WAIT instruction - Conditional move instructions - Vectored interrupts - Atomic interrupt enable/disable - One GPR shadow set to minimize latency of interrupts - Bit field manipulation instructions • microMIPS™ Instruction Set: - microMIPS allows improving the code size density over MIPS32, while maintaining MIPS32 performance. - microMIPS supports all MIPS32 instructions (except for branch-likely instructions) with new optimized 32-bit encoding. Frequent MIPS32 instructions are available as 16-bit instructions. - Added seventeen new and thirty-five MIPS32® corresponding commonly used instructions in 16-bit opcode format. - Stack Pointer implicit in instruction. - MIPS32 assembly and ABI compatible. • Memory Management Unit with Simple Fixed Mapping Translation (FMT) Mechanism • Multiply/Divide Unit (MDU): - Configurable using high-performance multiplier array. - Maximum issue rate of one 32x16 multiply per clock. - Maximum issue rate of one 32x32 multiply every other clock. - Early-in iterative divide. Minimum 11 and maximum 33 clock latency (dividend (rs) sign extension dependent). • Power Control: - No minimum frequency: 0 MHz. - Power-Down mode (triggered by WAIT instruction). • EJTAG Debug/Profiling: - CPU control with start, stop and single stepping. - Software breakpoints via the SDBBP instruction. - Optional simple hardware breakpoints on virtual addresses, 4 instruction and 2 data breakpoints. - PC and/or load/store address sampling for profiling. - Performance counters. - Supports Fast Debug Channel (FDC). A block diagram of the PIC32MM0064GPL036 family processor core is shown in Figure 3-1. Note: This data sheet summarizes the features of the PIC32MM0064GPL036 family of devices. It is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 50. “CPU for Devices with MIPS32® microAptiv™ and M-Class Cores” (DS60001192) in the “PIC32 Family Reference Manual”, which is available from the Microchip web site (www.microchip.com/PIC32). MIPS32® microAptiv™ UC microproces- sor core resources are available at: www.imgtec.com. The information in this data sheet supersedes the information in the FRM. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |