3

®

OPA4243

Supply Voltage, V+ to V– .................................................................... 36V

Input Voltage Range(2) ................................... (V–) – 0.3V to (V+) + 0.3V

Input Current(2) ................................................................................. 10mA

Output Short-Circuit(3) .............................................................. Continuous

Operating Temperature .................................................. –55

°C to +125°C

Storage Temperature ..................................................... –65

°C to +150°C

Junction Temperature ...................................................................... 150

°C

Lead Temperature (soldering, 10s) ................................................. 300

°C

ESD Capability ................................................................................ 2000V

NOTES: (1) Stresses above these ratings may cause permanent damage.

Exposure to absolute maximum conditions for extended periods may degrade

device reliability. (2) Inputs are diode-clamped to the supply rails and should

be current-limited to 10mA or less if input voltages can exceed rails by more

than 0.3V. (3) Short-circuit to ground, one amplifier per package.

ABSOLUTE MAXIMUM RATINGS(1)

PACKAGE/ORDERING INFORMATION

PACKAGE

SPECIFIED

DRAWING

TEMPERATURE

PACKAGE

ORDERING

TRANSPORT

PRODUCT

PACKAGE

NUMBER

RANGE

MARKING

NUMBER(1)

MEDIA

OPA4243EA

TSSOP-14

357

–40

°C to +85°C

OPA4243EA

OPA4243EA/250

Tape and Reel

""

"

"

"

OPA4243EA/2K5

Tape and Reel

NOTE: (1) Models with a slash (/) are available only in Tape and Reel in the quantities indicated (e.g., /2K5 indicates 2500 devices per reel). Ordering 2500 pieces

of “OPA4243EA” will get a single 2500-piece Tape and Reel.

ELECTROSTATIC

DISCHARGE SENSITIVITY

This integrated circuit can be damaged by ESD. Burr-Brown

recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling

and installation procedures can cause damage.

ESD damage can range from subtle performance degrada-

tion to complete device failure. Precision integrated circuits

may be more susceptible to damage because very small

parametric changes could cause the device not to meet its

published specifications.