D484 datasheet(2/5 Pages) AOSMD

2 / 5 page

AOD484

Symbol

Min

Typ

Max

Units

BVDSS

TJ=55°C

IGSS

±100

VGS(th)

1.5

2.5

ID(ON)

12.1

TJ=125°C

18.5

gFS

VSD

0.71

Ciss

938

1220

Coss

142

Crss

1.2

1.8

Qg(10V)

17.5

Qg(4.5V)

8.4

Qgs

3nC

Qgd

4.1

tD(on)

5ns

tD(off)

6ns

trr

Qrr

2.5

1.6

THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL

COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING

OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,

FUNCTIONS AND RELIABILITY WITHOUT NOTICE.

Body Diode Reverse Recovery Time

Drain-Source Breakdown Voltage

On state drain current

ID=250uA, VGS=0V

VGS=10V, VDS=5V

VGS=10V, ID=20A

Reverse Transfer Capacitance

IF=20A, dI/dt=100A/μs

VGS=0V, VDS=15V, f=1MHz

SWITCHING PARAMETERS

Electrical Characteristics (TJ=25°C unless otherwise noted)

STATIC PARAMETERS

Parameter

Conditions

IDSS

μA

Gate Threshold Voltage

VDS=VGS, ID=250μA

VDS=24V, VGS=0V

VDS=0V, VGS=±20V

Zero Gate Voltage Drain Current

Gate-Body leakage current

RDS(ON)

Static Drain-Source On-Resistance

Forward Transconductance

Diode Forward Voltage

VGS=4.5V, ID=15A

IS=1A, VGS=0V

VDS=5V, ID=20A

Gate resistance

VGS=0V, VDS=0V, f=1MHz

Turn-Off Fall Time

Total Gate Charge

VGS=10V, VDS=15V, ID=20A

Gate Source Charge

Gate Drain Charge

Total Gate Charge

Body Diode Reverse Recovery Charge IF=20A, dI/dt=100A/μs

Maximum Body-Diode Continuous Current

Input Capacitance

Output Capacitance

Turn-On DelayTime

DYNAMIC PARAMETERS

Turn-On Rise Time

Turn-Off DelayTime

VGS=10V, VDS=15V, RL=0.75Ω,

RGEN=3Ω

A: The value of R θJA is measured with the device mounted on 1in

2 FR-4 board with 2oz. Copper, in a still air environment with T

A =25°C. The

Power dissipation PDSM is based on R θJA and the maximum allowed junction temperature of 150°C. The value in any given application depends on

the user's specific board design, and the maximum temperature of 175°C may be used if the PCB allows it.

B. The power dissipation PD is based on TJ(MAX)=175°C, using junction-to-case thermal resistance, and is more useful in setting the upper

dissipation limit for cases where additional heatsinking is used.

C: Repetitive rating, pulse width limited by junction temperature T J(MAX)=175°C.

D. The R θJA is the sum of the thermal impedence from junction to case R θJC and case to ambient.

E. The static characteristics in Figures 1 to 6 are obtained using <300

μs pulses, duty cycle 0.5% max.

F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuming

a maximum junction temperature of T J(MAX)=175°C.

G. The maximum current rating is limited by bond-wires.

H. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with T A=25°C. The SOA

curve provides a single pulse rating.

Rev 1: Aug. 2006

Alpha & Omega Semiconductor, Ltd.

D484 bảng dữ liệu(PDF) 2 Page - Alpha & Omega Semiconductors

D484 bảng dữ liệu(HTML) 2 Page - Alpha & Omega Semiconductors

Html Pages

1 2 3 4 5

bảng dữ liệu tải về

Link URL