BMP384 datasheet(36/58 Pages) BOSCH

36 / 58 page

Bosch Sensortec | BMP384 Datasheet

36 | 58

Modifications reserved |Data subject not change without notice | Printed in Germany

Document number: BST-BMP384-DS003-11 Revision_1.0_112020

4.3.17. Register 0x1C “OSR”

The “OSR” register controls the oversampling settings for pressure and temperature measurements.

Table 41: Register 0x1C “OSR”

4.3.18. Register 0x1D “ODR”

The “ODR” register set the configuration of the output data rates by means of setting the 36ubdivision/subsampling.

Table 42: Register 0x1D “ODR”

Name

Description

Bit 2..0

osr_p

Oversampling setting pressure measurement

000

no oversampling.

001

x2 oversampling.

010

x4 oversampling.

011

x8 oversampling.

100

x16

x16 oversampling.

101

x32

x32 oversampling.

Bit 5..3

osr4_t

Oversampling setting temperature measurement

000

no oversampling

001

x2 oversampling

010

x4 oversampling

011

x8 oversampling

100

x16

x16 oversampling

101

x32

x32 oversampling

Name

Description

Bit 4..0

odr_sel

subdivision factor for pressure and temperature

measurements is 2^value. Allowed values are 0..17.

Other values are saturated at 17.

BMP384 bảng dữ liệu(PDF) 36 Page - Bosch Sensortec GmbH

BMP384 bảng dữ liệu(HTML) 36 Page - Bosch Sensortec GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

bảng dữ liệu tải về

Link URL