ST10F271B datasheet(90/180 Pages) STMICROELECTRONICS

tên linh kiện	ST10F271B

Giải thích chi tiết về linh kiện	16-bit MCU with 128 Kbyte Flash memory and 8/12 Kbyte RAM

PDF	180 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

90 / 180 page

System reset

ST10F271B/ST10F271E

90/180

Figure 22.

Synchronous short / long hardware RESET (EA = 0)

P0[15:13]

not transparent

RSTF

P0[12:2]

transparent

not t.

P0[1:0]

not t.

not transparent

RST

1024 TCL

3..8 TCL3)

2) VRPD > 2.5V Asynchronous Reset not entered

200mA Discharge

RPD

RSTOUT

At this time RSTF is sampled HIGH or LOW

so it is SHORT or LONG reset

(After Filter)

RSTIN

< 1032 TCL

≤4 TCL5)

≤12 TCL

≤500 ns

≥ 50 ns

≤500 ns

≥ 50 ns

≤500 ns

≥ 50 ns

ALE

8 TCL

1. RSTIN assertion can be released there. Refer also to Section 21.1 for details on minimum pulse duration.

2. If during the reset condition (RSTIN low), RPD voltage drops below the threshold voltage (about 2.5V for 5V operation)

the asynchronous reset is then immediately entered.

4. RSTIN pin is pulled low if bit BDRSTEN (bit 3 of SYSCON register) was previously set by software.

Bit BDRSTEN is cleared after reset.

5. Minimum RSTIN low pulse duration shall also be longer than 500ns to guarantee the pulse is not masked by the

internal filter (refer to Section 21.1).

Notes:

3. 3 to 8 TCL depending on clock source selection.

8 TCL

not t.

ST10F271B bảng dữ liệu(PDF) 90 Page - STMicroelectronics

ST10F271B bảng dữ liệu(HTML) 90 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL