| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TMPR3927 bảng dữ liệu(PDF) 55 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMPR3927 bảng dữ liệu(HTML) 55 Page - Toshiba Semiconductor |
|
55 / 512 page ![]() Chapter 3 Pins 3-9 3.3 Pin Multiplexing A total of 24 pins of the TX3927 have multiplexed functions. Table 3.3.1 shows the multiplexed pins. The functions of individual pins are selected in different ways. Table 3.3.2 shows the pins for which the PCFG control register determines the functions. Table 3.3.1 Pin Multiplexing Pin No. Signal Name Multiplexed Functions 217 SDCS_CE [5] * SDCS [5] */CE [5] * 216 SDCS_CE [4] * SDCS [4] */CE [4] * 215 SDCS_CE [3] * SDCS [3] */CE [3] * 214 SDCS_CE [2] * SDCS [2] */CE [2] * 52 GNT [0] * GNT_0_OUT/GNT_IN 56 REQ [0] * REQ_0_IN/REQ_OUT 55 REQ [1] * REQ_1_IN/XINT_OUT 125 DMAREQ [3] PIO [15] /DMAREQ [3] /TIMER [1] 126 DMAACK [3] PIO [14] /DMAACK [3] /TIMER [0] 127 DMAREQ [2] PIO [13] /DMAREQ [2] /TCLK 128 DMAACK [2] PIO [12] /DMAACK [2] 220 DMAREQ [1] PIO [11] /DMAREQ [1] /SDCS [7] */CE [7] * 219 DMAACK [1] PIO [10] /DMAACK [1] /SDCS [6] */CE [6] * 129 DMAREQ [0] PIO [9] /DMAREQ [0] 132 DMAACK [0] PIO [8] /DMAACK [0] 133 DMADONE* PIO [7] /DMADONE*/TIMER [0] 26 RXD [1] PIO [6] /RXD [1] 27 TXD [1] PIO [5] /TXD [1] 22 RXD [0] PIO [4] /RXD [0] 23 TXD [0] PIO [3] /TXD [0] 28 CTS [1] * PIO [2] /CTS [1] */GSDAO [1] 34 RTS [1] * PIO [1] /RTS [1] */DSF/GPCST [3] 25 CTS [0] * INT [5] /CTS [0] * 24 RTS [0] * INT [4] /RTS [0] * The SDCS_CE[5:2]* chip select signals, corresponding to channels 5 to 2, respectively, are shared for both SDRAM and ROM. If a given SDRAM or ROM channel is enabled using the SDRAM or ROM controller, the corresponding pin is assigned to that channel. If SDRAM and ROM channels having an identical number are enabled at the same time, the signal on the corresponding SDCS_CE pin is asserted in both SDRAM and ROM bus cycles, resulting in undetermined memory data. The PCI grant signals (GNT[3:0]*) and request signals (REQ[3:0]*) have different operations depending on whether the chip booted into external or internal PCI arbiter mode. In internal arbiter mode, REQ[3:0]* are input signals and GNT[3:0]* are output signals. In external arbiter mode, REQ[0]* becomes a request signal output to the PCI module and GNT[0]* becomes a grant signal input from the PCI module. REQ[1]* becomes an interrupt output that can be controlled with the PIO module flag registers. REQ[3:2]* and GNT[3:1]*, which become output and input pins, respectively, are not used. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |