| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MPC8280 bảng dữ liệu(PDF) 916 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8280 bảng dữ liệu(HTML) 916 Page - Freescale Semiconductor, Inc |
|
916 / 1386 page ![]() Multi-Channel Controllers (MCCs) MPC8280 PowerQUICC II Family Reference Manual, Rev. 1 29-26 Freescale Semiconductor • State 0—The first 3-5 bytes (depending on the contents of the LI field) are masked and then compared with the first 3-5 bytes of the last SU. If there is a match, go to State 1, else remain in State 0. The current SU will be received into a buffer descriptor. • State 1—The first 3-5 bytes (depending on the contents of the LI field) are masked and then compared with the first 3-5 bytes of the last SU. If there is a match, go to State 2, else go to State 0. The current SU will be received into a buffer descriptor. • State 2—The first 3-5 bytes (depending on the contents of the LI field) are masked and then compared with the first 3-5 bytes of the last SU. If there is a match, the current SU will be discarded (unless there is an error), the channel will remain in state 2 and SU error monitor will be adjusted accordingly. If the frames do not match, the current SU will be received into a buffer descriptor and the channel will return to State 0. 29.3.4.4.3 Filtering Limitations Because the algorithm is purely checking identical SUs, two FISUs will be received after each MSU rather than merely one, even though they have the same sequence numbers. Reception of an MSU resets the filtering algorithm. Also, reception of a short frame resets the filtering algorithm when SS7_OPT[SF_DIS] = 0; however, when SS7_OPT[SF_DIS] = 1 (short frames are discarded), the filtering algorithm remains unchanged. 29.3.4.4.4 Resetting the SU Filtering Mechanism This command resets the filtering algorithm to ensure that the next SU will be received, even if it would normally have been filtered. This command could be issued periodically so that the 603e core can check to make sure that the link is really up and not simply receiving flags. To issue this MCC command, refer to Section 14.4, “Command Set.” Use opcode 1110 (0xE). |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |