MPC8280 datasheet(703/1386 Pages) FREESCALE

703 / 1386 page

Serial Communications Controllers (SCCs)

MPC8280 PowerQUICC II Family Reference Manual, Rev. 1

Freescale Semiconductor

20-23

The DPLL can also be used to invert the data stream of a transfer. This feature is available in all encodings,

including standard NRZ format. Also, when the transmitter is idling, the DPLL can either force TXD high

or continue encoding the data supplied to it.

The DPLL is used for UART encoding/decoding, which gives the option of selecting the divide ratio in

the UART decoding process (8

×, 16×, or 32×). Typically, 16× is used.

Note the 1:4 system clock/serial clock ratio does not apply when the DPLL is used to recover the clock in

the 8

×, 16×, or 32× modes. Synchronization occurs internally after the DPLL generates the Rx clock.

Therefore, even the fastest DPLL clock generation (the 8

× option) easily meets the required 1:4 ratio

clocking limit.

20.3.6.1

Encoding Data with a DPLL

Each SCC contains a DPLL unit that can be programmed to encode and decode the SCC data as NRZ,

NRZI Mark, NRZI Space, FM0, FM1, Manchester, and Differential Manchester. Figure 20-15 shows the

different encoding methods.

Figure 20-15. DPLL Encoding Examples

FM1

All zeros

8-bit

Manchester

101010...10

8-bit

Differential Manchester

All ones

8-bit

Table 20-8. Preamble Requirements (continued)

Decoding Method

Preamble Pattern

Minimum Preamble Length Required

Data

NRZ

NRZI Mark

NRZI Space

FM0

FM1

Manchester

Differential

Manchester

MPC8280 bảng dữ liệu(PDF) 703 Page - Freescale Semiconductor, Inc

MPC8280 bảng dữ liệu(HTML) 703 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL