DCS-7316XFM-R datasheet(22/66 Pages) ARISTA

tên linh kiện	DCS-7316XFM-R

Giải thích chi tiết về linh kiện	Quick Start Guide 7300 Series Modular Data Center Switches

PDF	66 Pages

Scroll/Zoom	100%

nhà sản xuất	ARISTA [Arista Networks, Inc]

Trang chủ	https://www.arista.com/en/

Logo

22 / 66 page

1. Installing the shelves.

2. Installing the mounting ears.

3. Placing and securing the switch upon the shelves.

3.2.3.1

Shelf Installation

The installation process for each shelf is identical. The shelves must be installed on the same

horizontal level. In the following section, inner side illustrations feature the left shelf and outer side

illustrations feature the right shelf.

Perform the following procedure for each shelf:

1. If applicable, verify that both locking mechanism latches on the shelf are open (Figure 6: Left Shelf

– Inner View, insets A and B). Racks that do not require the locking mechanism, skip to Step 2.

2. Attach the front side of the shelf to its corresponding front rack post by inserting the shelf-side rack

plugs and guide pins into post slots (Figure 10: Attaching the Right Shelf).

The shelf ledge must be between the front posts. If the rack plugs were previously removed or not

present, use bolts to attach the shelf to the rack, and skip to Step 4..

Figure 10: Attaching the Right Shelf

Right front rack post

Right shelf

3. Close the front locking mechanism latch (Figure 7: Right Shelf – Outer View).

4. Glide the slide-end to a position outside of its rear rack post (Figure 11: Adjusting the Right Shelf ).

DCS-7316XFM-R bảng dữ liệu(PDF) 22 Page - Arista Networks, Inc