| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
CS4525 bảng dữ liệu(PDF) 88 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS4525 bảng dữ liệu(HTML) 88 Page - Cirrus Logic |
|
88 / 98 page ![]() 88 DS726PP1 CS4525 9.19 Power Control (Address 5Fh) 9.19.1 Automatic Power Stage Retry (AutoRetry) Default = 1 Function: Enables the Auto-Retry function upon over-current error. See “Automatic Power Stage Shut-Down” on page 53. 9.19.2 Select VD Level (SelectVD) Default = 1 Function: This bit selects between a VD of 2.5 V, 3.3 V, or 5.0 V. 9.19.3 Power Down ADC (PDnADC) Default = 1 Function: The ADC will enter a power down state when this bit is enabled. 9.19.4 Power Down PWM Power Output X (PDnOutX) Default = 1 Function: When set, the specific PWM power output will enter a power-down state. Only the output power stage is powered down. The PWM modulator is not affected, nor is the setup or delay register values. When set to normal operation, the specific output will power up according to the state of the RmpSpd[1:0] bits and the channel output configuration selected. When transitioning from normal operation to power down, the specific output will power down according to the state of the RmpSpd[1:0] bits and the channel output con- figuration selected. The entire divide will enter a low-power state when this function is enabled: 76 543 21 0 AutoRetry Reserved SelectVD PDnADC PDnOut3/4 PDnOut2 PDnOut1 PDnAll AutoRetry Setting Auto-Retry State 0 ..........................................Auto-Retry feature disabled. 1 ..........................................Auto-Retry feature enabled. SelectVD Setting Selected VD Level 0 ..........................................VD = 2.5 V. 1 ..........................................VD = 3.3 V or 5.0 V. PDnADC Setting ADC Power-Down State 0 ..........................................Normal ADC operation. 1 ..........................................ADC power-down enabled. PDnChX Setting Power Output X Power-Down State 0 ..........................................Normal power output X operation. 1 ..........................................Power output X power-down enabled. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |