Visit product website 

DATA SHEET

Type 6013



Plunger valve 2/2-way

direct-acting

Type 6027



Direct-acting 2/2-way

plunger valve

Type 0330



Direct-acting 2/2 or

3/2-way pivoted armature

valve

Type ME43



Fieldbus gateway

Standard | EU | en | 2024-03-06 | 26

Mass flow controller (MFC)/mass flow meter (MFM) for

gases

• Nominal flow ranges from 0.010 l/min to 160 l/min

• High accuracy and repeatability

• Very fast response times

• Simple device exchange due to configuration memory

• Optional: USP Class VI, FDA, EC 1935 compliant

The Type 8741 mass flow controller (MFC)/mass flow meter (MFM) for gases is

suitable for a variety of applications and is available with Industrial Ethernet, ana-

logue or fieldbus interfaces. The variant with CANopen-based Bürkert Systembus

(büS) is suitable for integration into existing CANopen networks or (in combination

with the Type ME43 fieldbus gateway) for integration into all common industry

standards for Industrial Ethernet and/or fieldbus. The latter option is tailor-made for

applications with many control loops. Up to 32 MFCs/MFMs can be connected to

one fieldbus gateway. Type ME43 transmits the internal CANopen-based commu-

nication to Industrial Ethernet and fieldbus standards. The mass flow controller/

mass flow meter can always switch between büS and CANopen communication.

Type 8741 can be configured as an MFM or an MFC according to demand. Further-

more a Modbus RTU variant is available as well. Optionally, up to four calibration

curves can be stored in the device. The thermal MEMS sensor is located directly in

the gas stream and therefore achieves very fast response times. As actuator, a

Bürkert direct-acting proportional valve guarantees high response sensitivity.

Product variants described in the data sheet may differ from the product presentation and description.

Type description

Can be combined with

Type 8741

© Christian Bürkert GmbH & Co. KG, Subject to alteration