SLRC61002HNSLASHT datasheet(2/139 Pages) NXP

2 / 139 page

NXP Semiconductors

SLRC610

High-performance ICODE frontend SLRC610 and SLRC610 plus

2 Features and benefits

• RFID frontend

• Supports ISO/IEC15693, ICODE EPC UID and ISO/IEC 18000-3 mode 3/ EPC Class-1 HF

• Low-power card detection

• Antenna connection with minimum number of external components

• Supported host interfaces:

– SPI up to 10 Mbit/s

– I2C-bus interfaces up to 400 kBd in Fast mode, up to 1000 kBd in Fast mode plus

– RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on pin voltage supply

• Separate I2C-bus interface for connection of a secure access module (SAM)

• FIFO buffer with size of 512 byte for highest transaction performance

• Flexible and efficient power saving modes including hard power down, standby and low-power card detection

• Cost saving by integrated PLL to derive system clock from 27.12 MHz RF quartz crystal

• 3 V to 5.5 V power supply (SLRC61002)

2.5 V to 5.5 V power supply (SLRC61003)

• Up to 8 free programmable input/output pins

• The version SLRC61003 offers a more flexible configuration for Low-Power Card detection compared to the

SLRC6102 with the new register LPCD_OPTIONS. In addition, the SLRC61003 offers new additional settings

for the Load Protocol which fit very well to smaller antennas. The SLRC61003 is therefore the recommended

version for new designs

SLRC610

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 5.1 — 3 January 2024

2 / 139

SLRC61002HN/T bảng dữ liệu(PDF) 2 Page - NXP Semiconductors