 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
INA700 bảng dữ liệu(PDF) 30 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
INA700 bảng dữ liệu(HTML) 30 Page - Texas Instruments |
|
|
30 / 50 page  7.6.1.10 Current Over-Limit Threshold (COL) Register (Address = Ch) [reset = 7FFFh] If negative values are entered in this register, then a current measurement of 0 A will trip this alarm. When using negative values for the under current and overcurrent thresholds be aware that the overcurrent threshold must be set to the larger (that is, less negative) of the two values. The COL register is shown in Table 7-14. Return to the Summary Table. Table 7-14. COL Register Field Descriptions Bit Field Type Reset Description 15-0 COL R/W 7FFFh Sets the threshold for comparison of the value to detect overcurrent condition (overcurrent protection). 2's-complement value. 7.6.1.11 Current Under-Limit Threshold (CUL) Register (Address = Dh) [reset = 8000h] The CUL register is shown in Table 7-15. Return to the Summary Table. Table 7-15. CUL Register Field Descriptions Bit Field Type Reset Description 15-0 CUL R/W 8000h Sets the threshold for comparison of the value to detect undercurrent condition. 2's-complement value. 7.6.1.12 Bus Overvoltage Threshold (BOVL) Register (Address = Eh) [reset = 7FFFh] The BOVL register is shown in Table 7-16. Return to the Summary Table. Table 7-16. BOVL Register Field Descriptions Bit Field Type Reset Description 15 Reserved R 0h Reserved. Always reads 0. 14-0 BOVL R/W 7FFFh Sets the threshold for comparison of the value to detect Bus Overvoltage (overvoltage protection). Unsigned representation, positive value only. Conversion factor: 3.125 mV/LSB. 7.6.1.13 Bus Undervoltage Threshold (BUVL) Register (Address = Fh) [reset = 0h] The BUVL register is shown in Table 7-16. Return to the Summary Table. Table 7-17. BUVL Register Field Descriptions Bit Field Type Reset Description 15 Reserved R 0h Reserved. Always reads 0. 14-0 BUVL R/W 0h Sets the threshold for comparison of the value to detect Bus Undervoltage (undervoltage protection). Unsigned representation, positive value only. Conversion factor: 3.125 mV/LSB. INA700 SBOSAB4A – MAY 2023 – REVISED SEPTEMBER 2023 www.ti.com 30 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated Product Folder Links: INA700 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
