97-607 datasheet(17/64 Pages) LSTD

17 / 64 page

FINGERSTOCK GASKETS AND METAL GROUNDING PRODUCTS

COMPACT PCI SYMMETRICAL MOUNT

2.4

www.lairdtech.com

FINGERSTOCK GASKETS AND METAL GROUNDING PRODUCTS

ALTERNATE SLOT SERIES

All dimensions shown are in inches (millimeters) unless otherwise specified.

Laird Technologies alternating slot/cut design is designed for use in a wide

variety of slotted applications, such as front panel handles, plug-in units,

subrack assemblies, chassis covers and backplanes.

The alternating slot / cut design serves to enhance the gasket strength,

while providing enough flexibility to allow the part to be folded in half with

no resultant finger damage. This is especially significant in during installation

or repair.

Available in a wide variety of plating finishes to meet galvanic compatibility

requirements.

Available in UltraSoft

™, low compression series (-078).

TOP VIEW

RIGHT VIEW

0.191

(4.851)

0.050

(1.270)

R. 0.050

(1.270)

52.5°

27.0°

0.026

(0.660)

2X 0.053

(1.346)

0.190

(4.826)

0.0025

(0.063)

0.012

(0.305)

0.085 REF.

(2.159)

0.065

(1.651)

TOP VIEW

16.000 (406.400) Length

14.568 (370.027) Length

0.374 (9.500)

Pitch

0.320

(8.128)

0.218 TYP

(5.537)

0.018 (0.457) Slot

Dimples on 1.500 (38.100) Centers

Randomly Located

Approximate number of fingers is 64.

Pitch 0.250 (6.350)

Slot 0.018 (0.457)

77-077

77-098

Laird Technologies offers a unique product designed to shield the front panels

of IEEE standard 1101.10 card cages, commonly referred to as Dot-10, called

the Compact PCI gasket.

This front panel shielding has been designed to shield between the front

panels on sub racks and plug-in units. This is a beryllium copper solid top

symmetrical slotted fingerstock strip pre-plated in sulfamate nickel. It is

designed to mount on the “T” shape on a front panel extrusion (see below).

Specially designed for wiping applications, this configuration allows total

symmetrical compression action with bi-directional engagement.

Standard size shown is based on the 9.5" (241.300) length per the Dot-10 standard.

Other lengths and plating finishes are available for your specific application.

RIGHT VIEW

2X 0.085

(2.159)

R 0.110

(2.794)

R 0.020

(0.508)

0.110

(2.794)

LT-3034 Metals_catalog

10/8/04

10:30 AM

Page 2.4

97-607 bảng dữ liệu(PDF) 17 Page - Laird Tech Smart Technology

97-607 bảng dữ liệu(HTML) 17 Page - Laird Tech Smart Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

bảng dữ liệu tải về

Link URL