The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend

accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。

-2 -

ELECTRICAL

Item

Requirement

Test Condition

Contact Resistance

Initial: 30mΩ Max.

After test: 100mΩ Max.

(EIA 364-23 )

Subject mated contacts assembled in housing to

20mV maximum open circuit at 100 mA maximum

The object of this test is to detail a standard

method to measure the electrical resistance across

a pair of mated contacts such that the insulating

films, if present will not be broken or asperity

melting will not occur.

Insulation Resistance

1000MΩ Min.

(EIA 364-21 )

Apply a 500V DC between adjacent terminals and

between terminals to ground

Dielectric Withstanding

Voltage

500V AC for 1 minute at

sea level, No flashover or

insulation breakdown

(EIA 364-20 )

Apply a voltage 500V AC R.M.S for 1 minute

between adjacent terminals and between terminals

to ground.

MECHANICAL

Item

Requirement

Test Condition

Contact Normal Force

0.2N min. per Pin

Apply perpendicular force to terminal at the rate of

12.5mm/min. Measure contact normal force at

working height, read at return curve.

Durability

No abnormal

Contact Normal force:

0.2N min. pre Pin

Contact Resistance:

100mΩ Max.

Mate and unmate connector to 5000 cycles. Take

reading at 5000 cycles.

1 cycles (card loaded)= lid closed->lid locked->lid

unlocked->lid opened

Exchange the actually card every 2000 cycles.