| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LPC55S0X bảng dữ liệu(PDF) 56 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
LPC55S0X bảng dữ liệu(HTML) 56 Page - NXP Semiconductors |
|
56 / 119 page ![]() LPC55S0x/LPC550x All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2023. All rights reserved. Product data sheet Rev. 1.4 — 14 April 2023 56 of 124 NXP Semiconductors LPC55S0x/LPC550x 32-bit ARM Cortex-M33 microcontroller 7.26.3 Windowed WatchDog Timer (WWDT) The purpose of the Watchdog Timer is to reset or interrupt the microcontroller within a programmable time if it enters an erroneous state. When enabled, a watchdog reset is generated if the user program fails to feed (reload) the Watchdog within a predetermined amount of time. 7.26.3.1 Features • Internally resets chip if not reloaded during the programmable time-out period. • Optional windowed operation requires reload to occur between a minimum and maximum time period, both programmable. • Optional warning interrupt can be generated at a programmable time prior to watchdog time-out. • Programmable 24-bit timer with internal fixed pre-scaler. • Selectable time period from 1,024 watchdog clocks (TWDCLK × 256 × 4) to over 67 million watchdog clocks (TWDCLK × 224 × 4) in increments of four watchdog clocks. • “Safe” watchdog operation. Once enabled, requires a hardware reset or a Watchdog reset to be disabled. • Incorrect feed sequence causes immediate watchdog event if enabled. • The watchdog reload value can optionally be protected such that it can only be changed after the “warning interrupt” time is reached. • Flag to indicate Watchdog reset. • The watchdog clock (WDCLK) is generated from always on FRO_1MHz clock which can be divided by WDT clock divider register. The accuracy of this clock is limited to +/- 15% over temperature, voltage, and silicon processing variations. • The Watchdog timer can be configured to run in Deep-sleep mode. • Debug mode. 7.27 Code WatchDog Timer (CWT) Code Watchdog for detecting code flow integrity. 7.27.1 Features • Secure Counter (SEC_CNT) to detect altered software in the execution flow. • Instruction Timer (INST_TIMER) which places a hard upper-limit on the interval between checks of the secure counter. 7.27.2 RTC timer The RTC block to count seconds and generate an alarm interrupt to the processor whenever the counter value equals the value programmed into the associated 32-bit match register. 7.27.2.1 Features • The RTC resides in a separate “always-on” voltage domain with battery backup. It utilizes an independent oscillator which is also in the “always-on” domain. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |