FXPS7115D4 datasheet(15/72 Pages) NXP

15 / 72 page

NXP Semiconductors

FXPS7115D4

Digital absolute pressure sensor, 40 kPa to 115 kPa

2. The host transmits the 7-bit client address.

3. The host transmits a '0' for the read/write bit to indicate a write operation.

4. The client transmits an ACK.

5. The host transmits the register address to be written.

6. The client transmits an ACK.

7. The host transmits the data byte to be written to the register address.

8. The client transmits an ACK.

9. The host transmits a STOP condition.

CLIENT ADDRESS

Host transmission

Client transmission

aaa-029920

The device automatically increments the register address allowing for multiple register writes to be completed in

one transaction. In this case, the register write data transfers are constructed as follows:

1. The host transmits a START condition.

2. The host transmits the 7-bit client address.

3. The host transmits a '0' for the read/write bit to indicate a write operation.

4. The client transmits an ACK.

5. The host transmits the register address to be written.

6. The client transmits an ACK.

7. The host transmits the data byte to be written to the register address.

8. The client transmits an ACK.

9. The host transmits the data byte to be written to the register address +1.

10. The client transmits an ACK.

11. Repeat steps 9 and 10 until all registers are written.

12. The host transmits a STOP condition.

7.4.6.2 Register read transfers

The device supports I2C register read data transfers. Register read data transfers are constructed as follows:

1. The host transmits a START condition.

2. The host transmits the 7-bit client address.

3. The host transmits a '0' for the read/write bit to indicate a write operation.

4. The client transmits an ACK.

5. The host transmits the register address to be read.

6. The client transmits an ACK.

7. The host transmits a repeat START condition.

8. The host transmits the 7-bit client address.

9. The host transmits a '1' for the read/write bit to indicate a read operation.

10. The client transmits an ACK.

11. The client transmits the data from the register addressed.

12. The host transmits a NACK.

13. The host transmits a STOP condition.

FXPS7115D4

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6.2 — 28 June 2023

15 / 72

FXPS7115D4 bảng dữ liệu(PDF) 15 Page - NXP Semiconductors

FXPS7115D4 bảng dữ liệu(HTML) 15 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

bảng dữ liệu tải về

Link URL