PQ201 datasheet(27/39 Pages) PICO

27 / 39 page

PicoScope® 6000E Series

TA369 MSO pod

The PicoScope 6000E Series can be upgraded to MSO capability by adding one or two

active MSO pods. Each pod features eight permanently attached flying leads terminating

in MSO probes for connection to the circuit under test.

The active MSO pods bring the MSO input circuitry closer to the device under test,

minimizing loading and giving the best possible performance.

The MSO pod connects to either of two digital interface ports on the scope front panel

using a 0.5 m digital interface cable and is powered by the scope. All PicoScope 6000E

Series models support up to two MSO pods.

The innovative single and multi-way ground clips allow fast and flexible connection to all

signal and ground pins in a double row header, regardless of where the layout engineer

has placed them.

Features:

•

8 digital inputs per pod

•

500 MHz bandwidth, 1 Gb/s

•

5 GS/s sampling on 16 digital channels

•

1 ns minimum pulse width

•

Minimal load on the device under test: 101 kΩ

∥3.5pF

•

Innovative ground clips for easy connection to 2-row, 2.54 mm-pitch headers

•

8 ground leads and 12 mini test hooks included

An MSO pod spares kit (PQ221) is also available, which contains extra 1-way, 4-way and

8-way MSO ground clips and MSO ground leads.

For a header with a mix of

non-adjacent and adjacent

signal pins.

For headers with signal

pins on one row and

grounds on the other row.

For headers with signals

situated together and

not enough grounds. A

ground lead can be used to

connect to a remote ground

pin on the device under

test.

Optional accessories

PQ201 bảng dữ liệu(PDF) 27 Page - Pico Technology Ltd.

PQ201 bảng dữ liệu(HTML) 27 Page - Pico Technology Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

bảng dữ liệu tải về

Link URL